AUM engine with ARZ ecu

Pages: [1]

« previous next »

Author

Topic: AUM engine with ARZ ecu (Read 2162 times)

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1578

	AUM engine with ARZ ecu « on: January 28, 2020, 11:47:48 PM »

Hi,

stumbled over a strange mk4 lately.
Engine and loom is AUM with wideband and vvt but ecu is 06A906032AR from ARZ engine with non-wideband and non-vvt.
I did not check for other differences between the two engines.

The car is running and block 31 does show voltage (non wideband) instead of lambda (wideband).
This is what impresses me most.

Is 6pin wideband backward compatible with 4pin non-wideband sensor?


	Logged

IamwhoIam

Hero Member

Karma: +45/-101
Offline

Offline

Posts: 1040

	Re: AUM engine with ARZ ecu « Reply #1 on: January 29, 2020, 01:51:46 AM »

Why wouldn't it run? I'm sure your block 031 shows gibberish instead of plausible narrowband voltages, 6 pin WBO2 is NOT backward complatible with narrowband O2 sensors.


	Logged

I have no logs because I have a boost gauge (makes things easier)

BlackT

Hero Member

Karma: +79/-39
Offline

Offline

Posts: 1422

	Re: AUM engine with ARZ ecu « Reply #2 on: January 29, 2020, 04:25:37 AM »

Don't do that, you will burn something in ECU or WBO(IF you already didn't)
Pin 5 on WBO ECU is for heating probe,
And Pin5 on narowband is connected to lambda output
Pin70 on WBO is for pump curent
Pin70 on narowband is heating element
That is a really big mess for lambda control in ECU


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

May 09, 2024, 03:40:13 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search