MED17.5.5 reading problems..

Pages: [1]

« previous next »

Author

Topic: MED17.5.5 reading problems.. (Read 7960 times)

guille_masco

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	MED17.5.5 reading problems.. « on: October 04, 2013, 09:43:55 AM »

Today I try to read/write a MED17.5.5 TC1767 from a 2013 VW 1.4Tsi Scirocco. Im using Mag x17, Im not suscribed since march, so Im not using latest software, and I didnt have pinout to boot it either.
Anyway, I managed to put it in bootmode, but it was password protected. So I remove all resistors in order to read password, But I get an error while im trying.
Is it posible this ecu is somehow TPROT more than 11???

Ecu # is: 03C906026AA 3730

Regards!


	Logged

k0mpresd

Hero Member

Karma: +146/-54
Offline

Offline

Posts: 1655

	Re: MED17.5.5 reading problems.. « Reply #1 on: October 04, 2013, 09:48:26 AM »

magpro manual says med17.5.5 is tc1766.


	Logged

guille_masco

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: MED17.5.5 reading problems.. « Reply #2 on: October 04, 2013, 11:10:35 AM »

I have read/write successfully many MED17.5.5 TC1766, but 2013 cars have TC1767 inside, and I have the above problem..


	Logged

IamwhoIam

Hero Member

Karma: +44/-101
Offline

Offline

Posts: 1039

	Re: MED17.5.5 reading problems.. « Reply #3 on: October 04, 2013, 04:21:15 PM »

TProt 8 up to 10 on VAG can currently be read/flashed with commercially available tools. TProt11 came up a few months ago and those cannot be done at this time.


	Logged

I have no logs because I have a boost gauge (makes things easier)

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

May 06, 2024, 02:32:22 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search