Pages: [1]
Author Topic: Make a base after turbo upgrade  (Read 1047 times)
ax0306
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« on: June 13, 2022, 04:52:13 AM »

Hello, I have change the turbo of my 1.8T (K03) by a K03s from an another 1.8T and i want to make a base for remap.

Can i copy map from the other car file ? KFLDIMX, KFLDRL,KFLDHB ? Axis of KFLDIMX and KFLDHBN are not exactly the same can icopy that also ?

Thanks in advance.
Logged
ax0306
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #1 on: June 14, 2022, 12:49:36 AM »

Finally i have take KFLDIMX,KFLDRL,Q0,Q1,Q2 and edit axis. After apply a basic stage 1 modification it's run nice and feel smooth.

So it's a good start if the other file's car have a similar engine setup, in my case it's AVJ-BEX.

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)