|
Title: immo off please Post by: kory2000pr on September 03, 2014, 05:28:47 AM Can someone immo off this bin for me please.
Thanks Title: Re: immo off please Post by: turboat on September 03, 2014, 05:36:35 AM do it yourself...
Title: Re: immo off please Post by: kory2000pr on September 03, 2014, 05:40:43 AM do it yourself... Thanks...Title: Re: immo off please Post by: kory2000pr on September 03, 2014, 06:44:36 AM If I change byte 32,33 will that be enough or I have to change the checksums?
immo2 I know theres no tool to modify the checksum on immo2 Title: Re: immo off please Post by: turboat on September 03, 2014, 07:30:32 AM Try this one, never done an immo2 before so this might be wrong...
Title: Re: immo off please Post by: kory2000pr on September 03, 2014, 08:33:37 AM thanks for your quick response!!!!!
Title: Re: immo off please Post by: turboat on September 03, 2014, 08:43:12 AM Please post up if it does/doesn't work
Title: Re: immo off please Post by: kory2000pr on September 03, 2014, 12:09:53 PM Please post up if it does/doesn't work Com Port: 5Baud Rate: 10400 Opening COM5 ... OK Starting Boot_mode ... uC identification response = 0xAA. Unknown ID. (error=0x0 1) Closing COM5 I dont think its working Title: Re: immo off please Post by: turboat on September 03, 2014, 12:28:33 PM You sure ecu is in boot mode?
Title: Re: immo off please Post by: kory2000pr on September 03, 2014, 03:06:45 PM after many attemps was able to get bootmode.
The bin is working perfectly. Now to flash the new bin... Thanks Title: Re: immo off please Post by: kory2000pr on September 03, 2014, 03:08:12 PM after many attemps was able to get bootmode. The bin is working perfectly. Now to flash the new tuned bin... Thanks |