Sadly i only find damos of 1.9 jtd and thats the wrong one.
Your file is extremely similar to that damos. Try to learn to use WinOLS in compare mode.|
1
ECU Files / ECU Definition File Requests / Re: 0281010741 Alfa 2.4 JTD 150 CV EDC15C7 Mappack or Help needed.
on: Today at 10:32:11 PM
|
||
| Started by Steven97i1 - Last post by prj | ||
|
Sadly i only find damos of 1.9 jtd and thats the wrong one. Your file is extremely similar to that damos. Try to learn to use WinOLS in compare mode. |
||
|
2
on: Today at 08:24:14 PM
|
||
| Started by Rick81 - Last post by Rick81 | ||
|
Thankyou will give it a go
|
||
|
3
on: Today at 06:41:55 PM
|
||
| Started by Rick81 - Last post by overspeed | ||
|
I guess Kess V3 can... protocol 2957, but never tried myself
|
||
|
4
on: Today at 05:56:37 PM
|
||
| Started by C5AudiGirl - Last post by _nameless | ||
|
Sorry, looking back on what I said does not make sense and I did not provide any real context. Let me try to make more sense. It sounds like you are stuck in programming mode, or does vcds not connect to the ecu at all? What was the number on the ecu case and what software version did you write to it?I have an ME7.1.1 ecu and I was trying to flash a S4 firmware to it and I went into vagcom it no longer had a HW number, no dtc's at all. I flashed it back to the A6 bin i backed up and still the same issue. I assume you can not just flash firmwares like that they probally have to match the hardware inside the ecu. I am just trying to get it back to a working state as the way it came. If any more info is needed please let me know and I will provide. |
||
|
5
ECU Files / ECU Definition File Requests / Re: 0281010741 Alfa 2.4 JTD 150 CV EDC15C7 Mappack or Help needed.
on: Today at 05:00:11 PM
|
||
| Started by Steven97i1 - Last post by Steven97i1 | ||
|
Hey thanks, sorry first time trying to figure out how the Mars should Look like!
Thanks for the Pointers! Sadly i only find damos of 1.9 jtd and thats the wrong one. |
||
|
6
on: Today at 03:23:47 PM
|
||
| Started by Rick81 - Last post by Rick81 | ||
|
Anyone please?
|
||
|
7
on: Today at 02:15:38 PM
|
||
| Started by C5AudiGirl - Last post by C5AudiGirl | ||
|
I guess Ill bite. You are not providing enough info for anyone to help you. Also, what you wrote does not make any sense. Sorry, looking back on what I said does not make sense and I did not provide any real context. Let me try to make more sense. I have an ME7.1.1 ecu and I was trying to flash a S4 firmware to it and I went into vagcom it no longer had a HW number, no dtc's at all. I flashed it back to the A6 bin i backed up and still the same issue. I assume you can not just flash firmwares like that they probally have to match the hardware inside the ecu. I am just trying to get it back to a working state as the way it came. If any more info is needed please let me know and I will provide. |
||
|
8
on: Today at 01:25:03 PM
|
||
| Started by ampmod - Last post by ampmod | ||
|
I Found Your topic about P1340 DTC delete. Maybe this is the best advice, If we can not change Cam Rotor Counter in the software.
Quote from: aef Post by: aef on April 10, 2015, 10:17:22 AM I am trying to find and delete DTC Location in my 360314 S3 8L Wideband file. This is my DTC: http://wiki.ross-tech.com/wiki/index.php/17748/P1340/004928 So we are talking about 1340 Today I tested the car - runs no problem, engine sound good and etc. |
||
|
9
on: Today at 11:56:08 AM
|
||
| Started by Ewp - Last post by Ewp | ||
|
Hello started to learn a little bit of programing. I have pulled original software from ecu and i dont know if i found right xdf file or not. Maybe someone could look and point me to the right direction.
|
||
|
10
on: Today at 06:31:44 AM
|
||
| Started by C5AudiGirl - Last post by _nameless | ||
|
I am trying to fix my 06 audi a6 4.2 ecu 4F0910560. I am trying to flash it and now it does not have a HW version. Any help? I guess Ill bite. You are not providing enough info for anyone to help you. Also, what you wrote does not make any sense. |
||