Hi to all,
sharing some info on MHH forum, an user told me that the following addresses on a G782_204.bin VW Golf 6 2.0 TFSI 199kw file (attached), are related to the Exhaust Control valve.
I've check on Bosch book and it says that controls is:
- 1D744F = KFBDEMFA
- 1D74A2 = KFBDEMFAD
- 1D74F4 = KFTMFADMX
The values in KFBDEMFA and KFBDEMFAD must describe exactly one operating mode:
Homogeneous (HOM) = 1
- Homogeneous lean (HMM) = 2
Homogeneous layer (HOS) = 4
Layer (SCH) = 8
Default parameterization:
KFBDEMFA: 1 (all values)
KFBDEMFAD: 1 (all values)
KFTMFADMX: 0.0 s (all values)
Stops for all three maps:
nmotbdemfa: 800, 1000, 1500, 2000, 2500, 3000, 3500, 4000, 4500, 5000, 5500, 6000 1 / min
mbdemfa: 0, 10, 20, 30, 40, 50, 60, 75, 80, 90%
So this map I believe are for the injection method. That's is right?
Someone can tell me something more to find the Exhaust control flap map?
Thanks
PurePower
The ABGKL module controls the exhaust flap.