maf reading high g/s. cammed engine

Pages: [1] 2

« previous next »

Author

Topic: maf reading high g/s. cammed engine (Read 5933 times)

dilly

Sr. Member

Karma: +12/-36
Offline

Offline

Posts: 304

	maf reading high g/s. cammed engine « on: March 03, 2019, 08:33:04 PM »

buddy has a cammed 12v vr6 (AFP)
stock engine other than a mildly built head due to bending valves. it has 276 cams and HD springs
runs like shit. I let him try my giac ecu but nothing changed
what i did notice is that the maf at idle was reading 6-7g/s which from my experience is way too high considering my stock vr runs at about ~3

maf is good

what i am assuming is that one of the maf tables need to be tweaked/scaled due to the increased amount of air being sucked in

correct me if i am wrong and if you have insight i would appreciate the info
thank you


	Logged

nyet

Administrator
Hero Member

Karma: +604/-166
Offline

Offline

Posts: 12235

	Re: maf reading high g/s. cammed engine « Reply #1 on: March 03, 2019, 08:42:39 PM »

Quote from: dirtnasty on March 03, 2019, 08:33:04 PM

what i am assuming is that one of the maf tables need to be tweaked/scaled due to the increased amount of air being sucked in

What? No. Why on earth would you change the MAF tables unless you changed the housing or sensor?


	Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.

dilly

Sr. Member

Karma: +12/-36
Offline

Offline

Posts: 304

	Re: maf reading high g/s. cammed engine « Reply #2 on: March 03, 2019, 08:59:40 PM »

Quote from: nyet on March 03, 2019, 08:42:39 PM

What? No. Why on earth would you change the MAF tables unless you changed the housing or sensor?

i don't know
that is why i am asking


	Logged

dilly

Sr. Member

Karma: +12/-36
Offline

Offline

Posts: 304

	Re: maf reading high g/s. cammed engine « Reply #3 on: March 03, 2019, 09:59:22 PM »

anyone have experience with cammed engines beit 2.7/8, vr, 1.8t etc wit this issue?
just want it to run correctly


	Logged

BlackT

Hero Member

Karma: +79/-39
Offline

Offline

Posts: 1423

	Re: maf reading high g/s. cammed engine « Reply #4 on: March 04, 2019, 12:05:51 AM »

That is a amount of air that engine sucks in at idle,you can't do anything. The MAF and ECU are paired?


	Logged

nyet

Administrator
Hero Member

Karma: +604/-166
Offline

Offline

Posts: 12235

	Re: maf reading high g/s. cammed engine « Reply #5 on: March 04, 2019, 12:19:30 AM »

trims, logs, dtc, etc.

Just going by g/s is pointless.


	Logged

Blazius

Hero Member

Karma: +89/-40
Online

Online

Posts: 1278

	Re: maf reading high g/s. cammed engine « Reply #6 on: March 04, 2019, 01:55:41 AM »

Usually cammed long duration engines require a tiny bit more fuel to get them to idle properly. But personally I think the tractor sound is pretty good Tongue

it just depends if its going to stall when when you are about to take off then you need to fix it.


	Logged

_nameless

Hero Member

Karma: +324/-450
Offline

Offline

Posts: 2708

	Re: maf reading high g/s. cammed engine « Reply #7 on: March 04, 2019, 06:38:14 AM »

Does the car have stock fueling, and maf? If so it should idle without issues. I have awp injectors in mine with a homemade mk3 short runner on my afp running corn juce with zero issues. I'd think you have a hardware issue


	Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/

_nameless

Hero Member

Karma: +324/-450
Offline

Offline

Posts: 2708

	Re: maf reading high g/s. cammed engine « Reply #8 on: March 04, 2019, 06:49:38 AM »

https://youtu.be/dKBsGB7tDnQ


	Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/

dilly

Sr. Member

Karma: +12/-36
Offline

Offline

Posts: 304

	Re: maf reading high g/s. cammed engine « Reply #9 on: March 04, 2019, 08:31:58 AM »

Quote from: BlackT on March 04, 2019, 12:05:51 AM

That is a amount of air that engine sucks in at idle,you can't do anything. The MAF and ECU are paired?

yes they are paired

Quote from: nyet on March 04, 2019, 12:19:30 AM

trims, logs, dtc, etc.

Just going by g/s is pointless.

trims were jumping around +8 to +25 not holding steady
p1141 Load Calculation Cross Check Range/Performance

Quote from: Blazius on March 04, 2019, 01:55:41 AM

Usually cammed long duration engines require a tiny bit more fuel to get them to idle properly. But personally I think the tractor sound is pretty good Tongue

it just depends if its going to stall when when you are about to take off then you need to fix it.

it does stall when coming back down to idle and throttle response it more than trash. it takes a second for it to react to pressing the pedal

Quote from: Marty on March 04, 2019, 06:38:14 AM

everything is stock except for the cams and springs


	Logged

dilly

Sr. Member

Karma: +12/-36
Offline

Offline

Posts: 304

	Re: maf reading high g/s. cammed engine « Reply #10 on: March 04, 2019, 12:50:07 PM »

also he just told me that it has a 9lb flywheel


	Logged

nyet

Administrator
Hero Member

Karma: +604/-166
Offline

Offline

Posts: 12235

	Re: maf reading high g/s. cammed engine « Reply #11 on: March 04, 2019, 02:51:27 PM »

Quote from: dirtnasty on March 04, 2019, 08:31:58 AM

yes they are pairedtrims were jumping around +8 to +25 not holding steady

Doen't make much sense for the MAF to read high yet run lean.

Something is very very wrong with the setup.


	Logged

dilly

Sr. Member

Karma: +12/-36
Offline

Offline

Posts: 304

	Re: maf reading high g/s. cammed engine « Reply #12 on: March 04, 2019, 05:08:41 PM »

Quote from: nyet on March 04, 2019, 02:51:27 PM

Doen't make much sense for the MAF to read high yet run lean.

Something is very very wrong with the setup.

Okay I will look into it further
Might be an injector issue

Odd thing is that it doesn’t break up or anything

Once it catches itself it revs fine throughout the rev range but once it comes down to idle, that’s when it stalls or reallllly struggles to stay alive


	Logged

nyet

Administrator
Hero Member

Karma: +604/-166
Offline

Offline

Posts: 12235

	Re: maf reading high g/s. cammed engine « Reply #13 on: March 04, 2019, 05:13:40 PM »

Could be a vac leak, but i'd expect that to have low MAF readings and run lean.


	Logged

BlackT

Hero Member

Karma: +79/-39
Offline

Offline

Posts: 1423

	Re: maf reading high g/s. cammed engine « Reply #14 on: March 04, 2019, 10:31:30 PM »

What values are of vaccum in intake manifold. Does anything break the engine, like bad altenator/AC compresor or something like that?


	Logged

Pages: [1] 2

« previous next »

Jump to:

Navigation

Personal Tools

May 12, 2024, 11:30:39 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search