|
Title: Cluster Diesel to Gasoline Conversion Post by: vara82 on December 04, 2017, 08:25:51 AM Hey Guys...
I´ve a little problem... My Car is a 2000 Audi A3 1.8t where my Cluster was damaged... I bought a new one... It´s the same cluster but from Diesel Engine... Both Clusters are VDO (old 8L0920931F, new 8L0920932D) I change the coding over OBD to Gasoline Turbo Engine and swapped my Gasoline Scales to the Diesel Cluster. But rpm shows still too much (seems it match to the Diesel Scales) Everything else works fine, Immo adapted successfully,... How can i change to Gasoline Engine to show the correct RPM?! Dump from the Diesel Cluster attached!! Best regards, Flo Title: Re: Cluster Diesel to Gasoline Conversion Post by: H2Deetoo on December 05, 2017, 12:13:01 AM Copy the RPM scale from one eeprom to the other.
Problem is locating the RPM scale in eeprom ... trial and error I guess. Title: Re: Cluster Diesel to Gasoline Conversion Post by: vara82 on December 05, 2017, 10:50:24 AM Thanks for your Reply...
I found a little Prog called "Dash Dump Edit"... With this program it´s easy to copy RPM and Speedo Data from one bin to another... Works very fine! Title: Re: Cluster Diesel to Gasoline Conversion Post by: macxxx on December 06, 2017, 10:32:31 AM Serch for Hex CC 00 or similar , next 8 bytes are the rpm map
|