|
Title: ME7.5 On-board diagnostics Parameter IDs (AUDI TT) Post by: Silver TT on March 09, 2016, 12:37:29 PM Hi, does anyone know where I can find a list of PID's for the ME7.5, that are outside the standard PID's (https://en.wikipedia.org/wiki/OBD-II_PIDs#Mode_1_PID_12)??
Specifically, I'm looking for the requested and actual boost (and the accompanying "formulas"), lambda, N75 Duty, misfire counter (for each cylinder), timing correction (for each cylinder)..... Is there a PID for actual torque being developed? Much appreciated! Thanks EDIT: I was "reading" through some literature on the ME7, and I found what I think I am looking for. Laderdruck = boost pressure, and you can see the formula on the right to convert from hex to physical units. Does anyone know how to interpret the mode and PID (parameter ID) from the table?????? Thanks (http://i952.photobucket.com/albums/ae10/Silver-TT/boost%20pressure_zpsimgmeyoh.jpg) Title: Re: ME7.5 On-board diagnostics Parameter IDs (AUDI TT) Post by: fknbrkn on March 09, 2016, 06:34:14 PM its a can-bus pids and there is no pvdkds at $588 because its 4-byte long
Title: Re: ME7.5 On-board diagnostics Parameter IDs (AUDI TT) Post by: Silver TT on March 10, 2016, 02:06:20 PM its a can-bus pids and there is no pvdkds at $588 because its 4-byte long Okay, thanks. What is 4-bytes long? I'm using the ELM327, So I think I should set the header first to talk to the ECU? Would I use a functional address or physical address? |