|
Title: stage 3+ golf need help but going ok so far have read forum as much as i can. Post by: atec.tuning on March 23, 2016, 04:30:41 PM hi have a golf 4 beloew are specs:
Bored out to 2 litre wossner forged Pistons, pauter steel rods, Schrick cams, flowed head, pro-m maf, 870cc injectors, gt35r turbo .86 exhaust outlet, external waste gate, 3" exhaust, (bosch type 44 fuel pump to be confirmed checking as we speak) aim for 600+bhp I attach my work so far fuel trims at idle are 1.6%+- wot throttle 10:1 11:1 have external lambda senor wideband. need help setting up further will attach logs when more required. at the moment trying to set up larger air mass @85mm housing pro m maf. not to far away i rekon i have attached ori + kp+my mod file winols and a crap mod to compare named: 1ML906032Aairmass221_535 (for 440cc inj) have removed files as there is downloads no comments. krkte 0.04151 temin+teminva adjusted maf scaled FKKVS need points to maf "correct" scaling however is running great need to know exaclty how it calculates correctly. Title: Re: stage 3+ golf need help but going ok so far have read forum as much as i can. Post by: Mechsoldier on March 27, 2016, 07:06:16 PM hi have a golf 4 beloew are specs: Bored out to 2 litre wossner forged Pistons, pauter steel rods, Schrick cams, flowed head, pro-m maf, 870cc injectors, gt35r turbo .86 exhaust outlet, external waste gate, 3" exhaust, (bosch type 44 fuel pump to be confirmed checking as we speak) aim for 600+bhp I attach my work so far fuel trims at idle are 1.6%+- wot throttle 10:1 11:1 have external lambda senor wideband. need help setting up further will attach logs when more required. at the moment trying to set up larger air mass @85mm housing pro m maf. not to far away i rekon i have attached ori + kp+my mod file winols and a crap mod to compare named: 1ML906032Aairmass221_535 (for 440cc inj) have removed files as there is downloads no comments. krkte 0.04151 temin+teminva adjusted maf scaled FKKVS need points to maf "correct" scaling however is running great need to know exaclty how it calculates correctly. I think there's maf scaling threads. Why are you running it so rich? That's way more fuel than it needs, and you're leaving hp on the table running that rich. Are you saying because it isn't scaled properly, you're running too rich? |