NefMoto

ECU Files => ECU Definition File Requests => Topic started by: vwaudiguy on March 29, 2016, 09:03:27 PM



Title: Help finding LAMFA in 06A906032CL V003
Post by: vwaudiguy on March 29, 2016, 09:03:27 PM
No idea why nothing I have lines up. Tried prj's map locator and that's not right either. Need the axis' too if you don't mind.  :)  Ori attached!


Title: Re: Help finding LAMFA in 06A906032CL V003
Post by: k0mpresd on March 29, 2016, 09:23:45 PM
ctrl-f, "0f 06", 0x1C028
0x1C00C, 8 bit, 40 factor.
0x1C01C, 16 bit, 0.003052 factor.

thats my guess anyways.


Title: Re: Help finding LAMFA in 06A906032CL V003
Post by: vwaudiguy on March 29, 2016, 09:33:55 PM
ctrl-f, "0f 06", 0x1C028
0x1C00C, 8 bit, 40 factor.
0x1C01C, 16 bit, 0.003052 factor.

thats my guess anyways.

Axis' look correct I had the RPM correct at least. Thanks. Data still does not look right. Possibly wrong data factor? Here's what I haz


Title: Re: Help finding LAMFA in 06A906032CL V003
Post by: vwaudiguy on April 02, 2016, 04:06:08 PM
Can anyone verify LAMFA in this binary? I checked against what I had, and everything else uses the same data factor (0.007813). I know processor speed affects factors, and this ecu seems to have a different processor. I did also find some other files that had LAMFA looking exactly the same.


Title: Re: Help finding LAMFA in 06A906032CL V003
Post by: vwaudiguy on April 03, 2016, 10:09:53 AM
Did some logging last night, and this map definitely responds to changes like LAMFA should. Still not sure why the data isn't like the others with 1 populating most of the map.