|
Title: LAMFA axis data Post by: fgtskofd on April 18, 2016, 01:35:42 PM hi guys
quick question on my axis data thats from a damos file, it seams to be following the top line in WOT but thats got a pedal position of 0% its target afr and driver request is at .8047 iv tried tweaking the KFLBTS but its not following that, this has this axis data that same in most map packs for the HJ file any suggestions ? KFFDLBTS has been zeroed thanks (http://postimg.org/image/r0cr01dbz/) Title: Re: LAMFA axis data Post by: fgtskofd on April 18, 2016, 01:39:38 PM http://postimg.org/image/r0cr01dbz/
Title: Re: LAMFA axis data Post by: fgtskofd on April 18, 2016, 02:22:15 PM if you have the same issue with me on the HJ file
should be map 1CEAC 6x15 x axis 1CEA0 x 0.003052 y axis 1CE90 x 40 was in damos map 1CEAB x 1CE9F x 0.003052 y 1CE90 x 40 |