|
Title: audi aeb and agu ecu physically the same? Post by: OGC on April 18, 2016, 04:17:01 PM just trying to figure put if the ecu connections are physically the same. anyone?
Title: Re: audi aeb and agu ecu physically the same? Post by: eliotroyano on April 18, 2016, 06:04:28 PM just trying to figure put if the ecu connections are physically the same. anyone? From my little experience of this old ECUs, some turbo M382s, almost 99% of turbo M383s and almost 99% of turbo M592s ECUs shares same hardware and have almost 99% same wiring compatibility. Most of changes are software related. I do not have enough experience with NA ECUs but seems to me that exist some hardware and software differences. Title: Re: audi aeb and agu ecu physically the same? Post by: _nameless on April 19, 2016, 05:20:15 AM Here in USA we don't have agu (transverse) DBC 1.8ts but I did use a agu file on a are ecu after I immo offed it to work on a friends aeb mk1 swap. We used transverse manifold and turbo/ downpipe. Made a few minor calibration changes for his current setup
And it works perfect. You'll need to use the right EEPROM file for the agu flash EPROM |