|
Title: 2001 A6 need immobilizer delete Post by: cederrowe on April 19, 2016, 03:23:44 PM Still learning but need some help today.
Ill have to bootmode first attempt went wrong. Attached is the original ecu read from mpps Title: Re: 2001 A6 need immobilizer delete Post by: vwaudiguy on April 19, 2016, 04:18:12 PM There is a way to delete the immo via the flash (the file you posted), but I haven't seen the method posted yet anywhere. The other way is by modifying the contents of the other unique ic on the board, the 95040 (e2p). Post that up.
Title: Re: 2001 A6 need immobilizer delete Post by: cederrowe on April 19, 2016, 04:26:02 PM Ya Daz always hooked me up when I needed deletes....
Title: Re: 2001 A6 need immobilizer delete Post by: _nameless on April 19, 2016, 06:41:32 PM If you flash a 2001 s4 file 551m (manual) or 551l (auto) the flash ignores immo from EEPROM because it's a factory no immo file. See the s4 wiki for proper coding.
Title: Re: 2001 A6 need immobilizer delete Post by: cederrowe on April 20, 2016, 11:09:25 AM I tried that and it with mpps and locked the ecu??? Ill bootmode it and try again...
Title: Re: 2001 A6 need immobilizer delete Post by: turboat on April 22, 2016, 01:45:07 AM Flashing an m-box will remove the immo. Alternatively, read the eeprom using argdub's tool, flip the immo bits and checksum, write it back in bootmode.
|