|
Title: ATW Help please Post by: mickeyd1984 on April 22, 2016, 05:36:06 PM i have ran this bin and it still comes up with one error. if someone could help it would be much appreciated
ATW1 is the org. and ATW LC is the save file ============================================================================== me7check v1.12 (c) mki, 06/2004-05/2012 Checking file C:\Users\Mike\atw1.bin (size=524288) Reading Version Strings... -> Bootrom Version = 05.12 -> EPK = 42/1/ME7.5/3/4012.00//F22id/Dst06g/250899/ -> Contents of ECUID data table: - '0261206537' (SSECUHN) - '1037352750' (SSECUSN) - '4B0906018P ' (VAG part number) - '0006' (VAG sw number) - '1.8L R4/5VT ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004' Page checksum failure(s) found Data area checksum failure(s) found -> Found 4 errors!!! ******************************* ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares] Inspiration from Andy Whittaker's tools and information. Written by 360trev and nyet [BSD License Open Source]. Attempting to open firmware file 'C:\Users\Mike\atw1.bin' Step #1: Reading ROM info .. Searching for EPK signature...OK Searching for ECUID table...OK EPK : '42/1/ME7.5/3/4012.00//F22id/Dst06g/250899/' Part Number : '4B0906018P ' Engine ID : '1.8L R4/5VT ' SW Version : '0006' HW Number : '0261206537' SW Number : '1037352750' Step #2: Reading ROMSYS .. Startup section: word[0x008000]+word[0x00FFFE] @008038 Add=0x007CD1 CalcAdd=0x007CD1 ADD OK Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0x7FFFF @00803c Add=0x3972A5 CalcAdd=0x3972A5 ADD OK All param page: word[0x010000]+word[0x01FFFE] @01b560 Add=0x00971D CalcAdd=0x00971D ADD OK Step #3: Reading RSA signatures .. Searching for RSA offset #0...missing Searching for RSA offset #1...missing Step #4: Finding CRC table(s) .. Searching for CRC table(s)...OK CRC table(s) OK Step #5: Reading Main Data Checksums .. Searching for main data CRC pre block...missing Searching for main data CRC/csum blocks...missing Falling back to default 512k CRC blocks...OK Searching for main data CRC offsets...OK Searching for main data checksum offsets...missing Main CRCs: 1) 0x010000-0x013FFF @70000 CRC: AB605C52 CalcCRC: F18CE969 ** FIXED ** 2) 0x014300-0x017F67 @70006 CRC: 3C65F2E3 CalcCRC: 61CE55AC ** FIXED ** 3) 0x018191-0x01FBFF @7000c CRC: A323DCA6 CalcCRC: A323DCA6 CRC OK Step #6: Reading Main Program Checksums .. Searching for main program checksum..OK ROM Checksum Block Offset Table @1dfec [16 bytes]: 1) 0x000000-0x00FBFF CalcChk: 47EF557E 0x00FC00-0x01FFFF CalcChk: 2CE0BB6D CalcCRC: CB27D284 SKIPPED 2) 0x020000-0x07FFFF <7ffe0> Chk: D81ED098 CalcChk: D81F2C0D ** FIXED ** Step #7: Reading Multipoint Checksum Blocks .. Searching for multipoint block descriptor #1...OK 1) <14224> 0x024000-0x02658D Chk: 0AFD060F CalcChk: 0AFD060F OK 2) <14234> 0x014000-0x014243 Chk: 005CAABC CalcChk: 005CAABC OK (i) 3) <14244> 0xFFFFFFFF-0xFFFFFFFF END Multipoint #1: [2 blocks x <16> = 32 bytes] Searching for multipoint block descriptor #2...OK 1) <1fc00> 0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK 2) <1fc10> 0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK 3) <1fc20> 0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK 4) <1fc30> 0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK Multipoint #2: [34 blocks x <16> = 544 bytes] *** Found 41 checksums in C:\Users\Mike\atw1.bin Attempting to output corrected firmware file 'C:\Users\Mike\atw lc.bin' þ Opening 'C:\Users\Mike\atw lc.bin' file for writing þ Writing to file þ Validating size correct 524288=524288 þ All OK, closing file *** DONE! 6/6 error(s) in C:\Users\Mike\atw1.bin corrected in C:\Users\Mike\atw lc.bin! *** ============================================================================== me7check v1.12 (c) mki, 06/2004-05/2012 Checking file C:\Users\Mike\atw lc.bin (size=524288) Reading Version Strings... -> Bootrom Version = 05.12 -> EPK = 42/1/ME7.5/3/4012.00//F22id/Dst06g/250899/ -> Contents of ECUID data table: - '0261206537' (SSECUHN) - '1037352750' (SSECUSN) - '4B0906018P ' (VAG part number) - '0006' (VAG sw number) - '1.8L R4/5VT ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004' Romsys checksum failure(s) found -> Found 1 error!!! ******************************* Your corrected .bin file is located at: C:\Users\Mike\atw lc.bin Title: Re: ATW Help please Post by: nyet on April 22, 2016, 10:17:58 PM https://github.com/nyetwurk/ME7Sum/issues/7
Run it through ME7Sum again. Title: Re: ATW Help please Post by: mickeyd1984 on April 23, 2016, 10:07:47 AM nyet this is what it comes up with now. i am not sure what to do to correct it.
c:\Users\Mike>ME7Check atw1.bin ============================================================================== ME7Check v1.12 (c) mki, 06/2004-05/2012 Checking file atw1.bin (size=524288) Reading Version Strings... -> Bootrom Version = 05.12 -> EPK = 42/1/ME7.5/3/4012.00//F22id/Dst06g/250899/ -> Contents of ECUID data table: - '0261206537' (SSECUHN) - '1037352750' (SSECUSN) - '4B0906018P ' (VAG part number) - '0006' (VAG sw number) - '1.8L R4/5VT ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004' Page checksum failure(s) found Data area checksum failure(s) found -> Found 4 errors!!! ******************************* c:\Users\Mike>me7sum atw1.bin ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares] Inspiration from Andy Whittaker's tools and information. Written by 360trev and nyet [BSD License Open Source]. Attempting to open firmware file 'atw1.bin' Step #1: Reading ROM info .. Searching for EPK signature...OK Searching for ECUID table...OK EPK : '42/1/ME7.5/3/4012.00//F22id/Dst06g/250899/' Part Number : '4B0906018P ' Engine ID : '1.8L R4/5VT ' SW Version : '0006' HW Number : '0261206537' SW Number : '1037352750' Step #2: Reading ROMSYS .. Startup section: word[0x008000]+word[0x00FFFE] @008038 Add=0x007CD1 CalcAdd=0x007CD1 ADD OK Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0x7FFFF @00803c Add=0x3972A5 CalcAdd=0x3972A5 ADD OK All param page: word[0x010000]+word[0x01FFFE] @01b560 Add=0x00971D CalcAdd=0x00971D ADD OK Step #3: Reading RSA signatures .. Searching for RSA offset #0...missing Searching for RSA offset #1...missing Step #4: Finding CRC table(s) .. Searching for CRC table(s)...OK CRC table(s) OK Step #5: Reading Main Data Checksums .. Searching for main data CRC pre block...missing Searching for main data CRC/csum blocks...missing Falling back to default 512k CRC blocks...OK Searching for main data CRC offsets...OK Searching for main data checksum offsets...missing Main CRCs: 1) 0x010000-0x013FFF @70000 CRC: AB605C52 CalcCRC: F18CE969 ** NOT OK ** 2) 0x014300-0x017F67 @70006 CRC: 3C65F2E3 CalcCRC: 61CE55AC ** NOT OK ** 3) 0x018191-0x01FBFF @7000c CRC: A323DCA6 CalcCRC: A323DCA6 CRC OK Step #6: Reading Main Program Checksums .. Searching for main program checksum..OK ROM Checksum Block Offset Table @1dfec [16 bytes]: 1) 0x000000-0x00FBFF CalcChk: 47EF557E 0x00FC00-0x01FFFF CalcChk: 2CE0BB6D CalcCRC: CB27D284 SKIPPED 2) 0x020000-0x07FFFF <7ffe0> Chk: D81ED098 CalcChk: D81ED098 OK (i) Step #7: Reading Multipoint Checksum Blocks .. Searching for multipoint block descriptor #1...OK 1) <14224> 0x024000-0x02658D Chk: 0AFD060F CalcChk: 0AFD060F OK 2) <14234> 0x014000-0x014243 Chk: 005CAABC CalcChk: 005CAABC OK (i) 3) <14244> 0xFFFFFFFF-0xFFFFFFFF END Multipoint #1: [2 blocks x <16> = 32 bytes] Searching for multipoint block descriptor #2...OK 1) <1fc00> 0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK 2) <1fc10> 0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK 3) <1fc20> 0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK 4) <1fc30> 0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK 7) <1fc60> 0x010000-0x013FFF Chk: 09F29E83 CalcChk: 09F27D2C ** NOT OK ** 8) <1fc70> 0x014000-0x017F4F Chk: 0CE6C136 CalcChk: 0CE5C336 ** NOT OK ** Multipoint #2: [34 blocks x <16> = 544 bytes] *** Found 41 checksums in atw1.bin *** WARNING! 4/4 uncorrected error(s) in atw1.bin! *** c:\Users\Mike> Title: Re: ATW Help please Post by: nyet on April 23, 2016, 10:08:41 AM run it again with an output file this time.
Title: Re: ATW Help please Post by: mickeyd1984 on April 23, 2016, 10:25:23 AM c:\Users\Mike>me7sum atw1.bin atw2.bin
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares] Inspiration from Andy Whittaker's tools and information. Written by 360trev and nyet [BSD License Open Source]. Attempting to open firmware file 'atw1.bin' Step #1: Reading ROM info .. Searching for EPK signature...OK Searching for ECUID table...OK EPK : '42/1/ME7.5/3/4012.00//F22id/Dst06g/250899/' Part Number : '4B0906018P ' Engine ID : '1.8L R4/5VT ' SW Version : '0006' HW Number : '0261206537' SW Number : '1037352750' Step #2: Reading ROMSYS .. Startup section: word[0x008000]+word[0x00FFFE] @008038 Add=0x007CD1 CalcAdd=0x007CD1 ADD OK Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0x7FFFF @00803c Add=0x3972A5 CalcAdd=0x3972A5 ADD OK All param page: word[0x010000]+word[0x01FFFE] @01b560 Add=0x00971D CalcAdd=0x00971D ADD OK Step #3: Reading RSA signatures .. Searching for RSA offset #0...missing Searching for RSA offset #1...missing Step #4: Finding CRC table(s) .. Searching for CRC table(s)...OK CRC table(s) OK Step #5: Reading Main Data Checksums .. Searching for main data CRC pre block...missing Searching for main data CRC/csum blocks...missing Falling back to default 512k CRC blocks...OK Searching for main data CRC offsets...OK Searching for main data checksum offsets...missing Main CRCs: 1) 0x010000-0x013FFF @70000 CRC: AB605C52 CalcCRC: F18CE969 ** FIXED ** 2) 0x014300-0x017F67 @70006 CRC: 3C65F2E3 CalcCRC: 61CE55AC ** FIXED ** 3) 0x018191-0x01FBFF @7000c CRC: A323DCA6 CalcCRC: A323DCA6 CRC OK Step #6: Reading Main Program Checksums .. Searching for main program checksum..OK ROM Checksum Block Offset Table @1dfec [16 bytes]: 1) 0x000000-0x00FBFF CalcChk: 47EF557E 0x00FC00-0x01FFFF CalcChk: 2CE0BB6D CalcCRC: CB27D284 SKIPPED 2) 0x020000-0x07FFFF <7ffe0> Chk: D81ED098 CalcChk: D81F2C0D ** FIXED ** Step #7: Reading Multipoint Checksum Blocks .. Searching for multipoint block descriptor #1...OK 1) <14224> 0x024000-0x02658D Chk: 0AFD060F CalcChk: 0AFD060F OK 2) <14234> 0x014000-0x014243 Chk: 005CAABC CalcChk: 005CAABC OK (i) 3) <14244> 0xFFFFFFFF-0xFFFFFFFF END Multipoint #1: [2 blocks x <16> = 32 bytes] Searching for multipoint block descriptor #2...OK 1) <1fc00> 0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK 2) <1fc10> 0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK 3) <1fc20> 0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK 4) <1fc30> 0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK Multipoint #2: [34 blocks x <16> = 544 bytes] *** Found 41 checksums in atw1.bin Attempting to output corrected firmware file 'atw2.bin' ├╛ Opening 'atw2.bin' file for writing ├╛ Writing to file ├╛ Validating size correct 524288=524288 ├╛ All OK, closing file *** DONE! 6/6 error(s) in atw1.bin corrected in atw2.bin! *** c:\Users\Mike>ME7Check atw2.bin ============================================================================== ME7Check v1.12 (c) mki, 06/2004-05/2012 Checking file atw2.bin (size=524288) Reading Version Strings... -> Bootrom Version = 05.12 -> EPK = 42/1/ME7.5/3/4012.00//F22id/Dst06g/250899/ -> Contents of ECUID data table: - '0261206537' (SSECUHN) - '1037352750' (SSECUSN) - '4B0906018P ' (VAG part number) - '0006' (VAG sw number) - '1.8L R4/5VT ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004' Romsys checksum failure(s) found -> Found 1 error!!! ******************************* c:\Users\Mike> Title: Re: ATW Help please Post by: mickeyd1984 on April 23, 2016, 10:29:03 AM Nyet i think i figured it out i just kept running it over and it finnaly said no errors thank you for the help and inspiration
c:\Users\Mike>me7sum atw2.bin atw3.bin ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares] Inspiration from Andy Whittaker's tools and information. Written by 360trev and nyet [BSD License Open Source]. Attempting to open firmware file 'atw2.bin' Step #1: Reading ROM info .. Searching for EPK signature...OK Searching for ECUID table...OK EPK : '42/1/ME7.5/3/4012.00//F22id/Dst06g/250899/' Part Number : '4B0906018P ' Engine ID : '1.8L R4/5VT ' SW Version : '0006' HW Number : '0261206537' SW Number : '1037352750' Step #2: Reading ROMSYS .. Startup section: word[0x008000]+word[0x00FFFE] @008038 Add=0x007CD1 CalcAdd=0x007CD1 ADD OK Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0x7FFFF @00803c Add=0x39FFBC CalcAdd=0x3972A5 ** FIXED ** All param page: word[0x010000]+word[0x01FFFE] @01b560 Add=0x00971D CalcAdd=0x00971D ADD OK Step #3: Reading RSA signatures .. Searching for RSA offset #0...missing Searching for RSA offset #1...missing Step #4: Finding CRC table(s) .. Searching for CRC table(s)...OK CRC table(s) OK Step #5: Reading Main Data Checksums .. Searching for main data CRC pre block...missing Searching for main data CRC/csum blocks...missing Falling back to default 512k CRC blocks...OK Searching for main data CRC offsets...OK Searching for main data checksum offsets...missing Main CRCs: 1) 0x010000-0x013FFF @70000 CRC: F18CE969 CalcCRC: F18CE969 CRC OK 2) 0x014300-0x017F67 @70006 CRC: 61CE55AC CalcCRC: 61CE55AC CRC OK 3) 0x018191-0x01FBFF @7000c CRC: A323DCA6 CalcCRC: A323DCA6 CRC OK Step #6: Reading Main Program Checksums .. Searching for main program checksum..OK ROM Checksum Block Offset Table @1dfec [16 bytes]: 1) 0x000000-0x00FBFF CalcChk: 47EFE295 0x00FC00-0x01FFFF CalcChk: 2CE0BB6D CalcCRC: 7AF543DA SKIPPED 2) 0x020000-0x07FFFF <7ffe0> Chk: D81F2C0D CalcChk: D81FB924 ** FIXED ** Step #7: Reading Multipoint Checksum Blocks .. Searching for multipoint block descriptor #1...OK 1) <14224> 0x024000-0x02658D Chk: 0AFD060F CalcChk: 0AFD060F OK 2) <14234> 0x014000-0x014243 Chk: 005CAABC CalcChk: 005CAABC OK (i) 3) <14244> 0xFFFFFFFF-0xFFFFFFFF END Multipoint #1: [2 blocks x <16> = 32 bytes] Searching for multipoint block descriptor #2...OK 1) <1fc00> 0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK 2) <1fc10> 0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK 3) <1fc20> 0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK 4) <1fc30> 0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK Multipoint #2: [34 blocks x <16> = 544 bytes] *** Found 41 checksums in atw2.bin Attempting to output corrected firmware file 'atw3.bin' ├╛ Opening 'atw3.bin' file for writing ├╛ Writing to file ├╛ Validating size correct 524288=524288 ├╛ All OK, closing file *** DONE! 3/3 error(s) in atw2.bin corrected in atw3.bin! *** c:\Users\Mike>ME7Check atw3.bin ============================================================================== ME7Check v1.12 (c) mki, 06/2004-05/2012 Checking file atw3.bin (size=524288) Reading Version Strings... -> Bootrom Version = 05.12 -> EPK = 42/1/ME7.5/3/4012.00//F22id/Dst06g/250899/ -> Contents of ECUID data table: - '0261206537' (SSECUHN) - '1037352750' (SSECUSN) - '4B0906018P ' (VAG part number) - '0006' (VAG sw number) - '1.8L R4/5VT ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004' -> No errors found. File is OK. ********************* c:\Users\Mike> Title: Re: ATW Help please Post by: nyet on April 23, 2016, 11:52:42 AM Glad you got it sorted. Need to fix that issue, but most people don't modify the areas you did.
Title: Re: ATW Help please Post by: mickeyd1984 on April 23, 2016, 11:56:31 AM That is true lol it sucks to have a narrowband aeb with an atw harness\ecu combo. Can not wait to go wideband. Anyway again thank you for you time and help
|