|
Title: Stock bin file 06A906032MJ - HN xdf Post by: pd3tc on April 24, 2016, 01:39:09 AM My name is PD3TC from Holland.
I am a mechanic by profession work most of vag and Subaru. Sorry my english is not so good. I'm looking for some help from you. I have a Seat Leon 1.8 T with a ME7.5 ECM. 06A906032 MJ Now that the ECM has a flash with a broken checksum. Done by a bad tunning. Now I have a stock bin file from the Internet. Could someone tell me whether this is a stock file. I would like to flash this file in my ECM in boot mode with nefmoto software or ktech. I would like in this file do sai delete. Can I use the HN XDF file for the ECU. So I can do with the tuner pro sai delete on the stock software. and can flash this in my ECM. greetings PD3TC Title: Re: Stock bin file 06A906032MJ - HN xdf Post by: pd3tc on April 24, 2016, 01:41:00 AM OK
Title: Re: Stock bin file 06A906032MJ - HN xdf Post by: vwaudiguy on April 24, 2016, 09:26:36 AM The file you posted is stock. I don't believe the HN definitions match this file.
Title: Re: Stock bin file 06A906032MJ - HN xdf Post by: pd3tc on April 24, 2016, 12:36:49 PM Ok thank you for your comment.
I had a member that I could use the hn XDF for mj. Because I think a lot of maps with the same addresses. ??? Title: Re: Stock bin file 06A906032MJ - HN xdf Post by: 316LV on April 26, 2016, 05:41:01 PM vwaudiguy is correct. The HN definition doesn't match at all- I just checked for you. Nowhere even close.
The file you posted has a 5.12 bootrom like the HN. If you want to take the chance it should cross flash with HN even though it is VAG100 instead of VAG163. Conventional wisdom is that files with the same bootrom should cross flash, but I'm no expert. The HN SW001 is really well defined... Title: Re: Stock bin file 06A906032MJ - HN xdf Post by: pd3tc on April 27, 2016, 02:06:37 AM thanks for your comment.
I'm confused about the ECU and the possibilities. :'( :'( :'( I must create my XDF I understand. if there is already a XDF for mj. On this forum I found a list with at maps. this can I still use to to put a XDF. ??? MAP FOUND: KFZWOP 11x16 @ 0x11585 MAP FOUND: KFZWOP2 11x16 @ 0x11635 MAP FOUND: KFZW 12x16 @ 0x120EB MAP FOUND: KFZW2 12x16 @ 0x121AB MAP FOUND: KFMIRL 16x16 @ 0x15076 MAP FOUND: KFMIOP 11x16 @ 0x166EC MAP FOUND: KFLBTS 16x12 @ 0x19325 MAP FOUND: LAMFA 6x15 @ 0x1CF2C MAP FOUND: KFLDIMX 8x16 @ 0x1E824 MAP FOUND: KFLDHBN 8x8 @ 0x1EF16 MAP FOUND: KFDLULS 8x8 @ 0x1F33F MAP FOUND: KFLDRL 10x16 @ 0x1E976 MAP FOUND: LDRXN 16x1 @ 0x1F248 MAP FOUND: LDRXNZK 16x1 @ 0x1F28A MAP FOUND: VMAXNB 1x1 @ 0x1FAAC MAP FOUND: VMAXTM 5x1 @ 0x1FABA MAP FOUND: VNMX 1x1 @ 0x116F6 MAP FOUND: NMAXDVG 1x8 @ 0x1FA8A MAP FOUND: NMAXGA 1x8 @ 0x1FA9A MAP FOUND: NMAX 1x1 @ 0x16870 MAP FOUND: NMAXDV 1x1 @ 0x16872 MAP FOUND: NMAXOG 1x1 @ 0x16878 MAP FOUND: DNMAXH 1x1 @ 0x1686A MAP FOUND: ITNMXH 1x1 @ 0x1686E MAP FOUND: TMOTNMX 1x1 @ 0x1FAAA MAP FOUND: TNMXH 1x1 @ 0x1687C MAP FOUND: CWDLSAHK 1x1 @ 0x18773 MAP FOUND: CDKAT 1x1 @ 0x181A3 MAP FOUND: CDHSH 1x1 @ 0x1819E MAP FOUND: CDHSHE 1x1 @ 0x1819F MAP FOUND: CDHSHE 1x1 @ 0x1819F MAP FOUND: CDLSH 1x1 @ 0x181AB MAP FOUND: CDSLS 1x1 @ 0x181B0 MAP FOUND: CLAHSH 1x1 @ 0x107D1 MAP FOUND: CLAHSH2 1x1 @ 0x107D2 MAP FOUND: CLAHSHE 1x1 @ 0x107D3 MAP FOUND: CLASLPE 1x1 @ 0x10805 MAP FOUND: CLASLVE 1x1 @ 0x10808 MAP FOUND: CLASLVE 1x1 @ 0x1080B MAP FOUND: KRKTE 1x1 @ 0x1CDD2 TNX Title: Re: Stock bin file 06A906032MJ - HN xdf Post by: _nameless on April 27, 2016, 04:44:12 AM thanks for your comment. Almost all emissions related me7.5 addresses are roughly in the same location. 90% even line up besides that just cross flash to hn file if your immo 3 and use that map pack I'm confused about the ECU and the possibilities. :'( :'( :'( I must create my XDF I understand. if there is already a XDF for mj. On this forum I found a list with at maps. this can I still use to to put a XDF. ??? MAP FOUND: KFZWOP 11x16 @ 0x11585 MAP FOUND: KFZWOP2 11x16 @ 0x11635 MAP FOUND: KFZW 12x16 @ 0x120EB MAP FOUND: KFZW2 12x16 @ 0x121AB MAP FOUND: KFMIRL 16x16 @ 0x15076 MAP FOUND: KFMIOP 11x16 @ 0x166EC MAP FOUND: KFLBTS 16x12 @ 0x19325 MAP FOUND: LAMFA 6x15 @ 0x1CF2C MAP FOUND: KFLDIMX 8x16 @ 0x1E824 MAP FOUND: KFLDHBN 8x8 @ 0x1EF16 MAP FOUND: KFDLULS 8x8 @ 0x1F33F MAP FOUND: KFLDRL 10x16 @ 0x1E976 MAP FOUND: LDRXN 16x1 @ 0x1F248 MAP FOUND: LDRXNZK 16x1 @ 0x1F28A MAP FOUND: VMAXNB 1x1 @ 0x1FAAC MAP FOUND: VMAXTM 5x1 @ 0x1FABA MAP FOUND: VNMX 1x1 @ 0x116F6 MAP FOUND: NMAXDVG 1x8 @ 0x1FA8A MAP FOUND: NMAXGA 1x8 @ 0x1FA9A MAP FOUND: NMAX 1x1 @ 0x16870 MAP FOUND: NMAXDV 1x1 @ 0x16872 MAP FOUND: NMAXOG 1x1 @ 0x16878 MAP FOUND: DNMAXH 1x1 @ 0x1686A MAP FOUND: ITNMXH 1x1 @ 0x1686E MAP FOUND: TMOTNMX 1x1 @ 0x1FAAA MAP FOUND: TNMXH 1x1 @ 0x1687C MAP FOUND: CWDLSAHK 1x1 @ 0x18773 MAP FOUND: CDKAT 1x1 @ 0x181A3 MAP FOUND: CDHSH 1x1 @ 0x1819E MAP FOUND: CDHSHE 1x1 @ 0x1819F MAP FOUND: CDHSHE 1x1 @ 0x1819F MAP FOUND: CDLSH 1x1 @ 0x181AB MAP FOUND: CDSLS 1x1 @ 0x181B0 MAP FOUND: CLAHSH 1x1 @ 0x107D1 MAP FOUND: CLAHSH2 1x1 @ 0x107D2 MAP FOUND: CLAHSHE 1x1 @ 0x107D3 MAP FOUND: CLASLPE 1x1 @ 0x10805 MAP FOUND: CLASLVE 1x1 @ 0x10808 MAP FOUND: CLASLVE 1x1 @ 0x1080B MAP FOUND: KRKTE 1x1 @ 0x1CDD2 TNX Good luck Title: Re: Stock bin file 06A906032MJ - HN xdf Post by: pd3tc on May 08, 2016, 01:14:50 AM Bit late but here the outcome.
I have the stock flash shot in the ECU with mpps in the boot mode. I found out that Bosch ME7.5 have a 29F800BB memory. I have programmed the pump sai delete and working super CWKONABG from 5 to 1 My next step is to go on about the 06A906032HN.bin Now I have just one stock HN file search for seat leon. Greetings PD3TC ;) ;) |