|
Title: Me7.5 Immo turns on after 2nd try (Prob solved) Post by: Jim_Coupe on May 03, 2016, 07:05:43 AM Hi, I have recently experimented with two of my 4B0906018AL ECU´s and now the car starts after i have just connected the ECU to harness. But if I turn ign OFF and try to start again... Immo light goes on? WFT is this?
I bootflashed booth ECUs tryed to Flash them as a P box.. But that wasnt so good so i decided to bootmode flash them back to where i Was. The all this started with the immo... any ideas? Title: Re: Me7.5 Immo turns on after 2nd try (Prob solved) Post by: Jim_Coupe on May 03, 2016, 07:38:44 AM I Backed to my ori file and everything went smooth... Probably some kind of cehcksum error... dunno..
|