|
Title: Adaptation - Not OK. SKC Post by: andrew8527 on May 03, 2016, 07:43:25 PM Presently have an IMMO defeated stock ECU in an '03 A4 (replacement during previous owner's tenure). My goal is to replace this ECU with a (used) MTM chipped ECU. (There is a physical chip on the board, FWIW). I have been advised there are two ways to do this: pair SKCs, or IMMO defeat the MTM chipped box. I'm attempting the former....
I obtained the SKC for the MTM chipped ECU - 04489. I obtained the SKC for the cluster - 00999. I verify that each one is valid by logging into the respective locations. I am using Ross-Tech's WIKI for adapting the MTM chipped ECU to the cluster. Unfortunately, I'm getting "Adaptation - Not OK" where it appears I should see a VIN populate according to their how to video. This is what I see after I click "test": (http://media.fotki.com/1_p,rtqggwdrkfftgkfxsgdtkrtrbqs,vi/bsfgbftkkxbsgbrssfgxbskdqqwdg/4/48510/325829/step2-vi.jpg) Appreciate any thoughts.... Title: Re: Adaptation - Not OK. SKC Post by: vwmaniac on May 12, 2016, 08:44:56 PM You are better off manually marrying the immo, there is a write up on here. Or defeating. You only need to add skc and immo id, vin number isn't nessicary for it to marry.
|