|
Title: Tuning for wastegate pressure Post by: lowvo on May 11, 2016, 08:34:39 AM Simple question, long back story, I will elaborate if needed but how do I change vpssplg_w I can not find it in tunerpro.
Title: Re: Tuning for wastegate pressure Post by: bobbyz0r on May 12, 2016, 01:29:09 AM vpssplg_w is not a map, but a variable. If you mean the axis in the maps it appears in, find the address for the axis from a map which you know uses the vpssplg_w axis, such as KFVPDKSD.
Title: Re: Tuning for wastegate pressure Post by: lowvo on May 12, 2016, 07:20:12 AM Okay thank you, so I use a hex Editor to change it?
Title: Re: Tuning for wastegate pressure Post by: TijnCU on May 12, 2016, 07:55:05 AM If you are that hardcore type that reads and writes in hex, you can. Otherwise, find the map and axis, apply factor and offsets and change the map in tunerpro ;D
Title: Re: Tuning for wastegate pressure Post by: lowvo on May 14, 2016, 08:56:58 AM In Tunerpro, I do see some axises (?), but I cannot find this one. I'm trying to follow the directions in the S4 tuning Wiki about adjusting for different wastegate pressure.
|