NefMoto

Noob Zone => Noob Questions => Topic started by: Gulfstream on May 14, 2016, 07:01:24 PM



Title: Write a wrong file on my ECU
Post by: Gulfstream on May 14, 2016, 07:01:24 PM
Hi People!

I write a wrong file on my M7.1. It occours others times, but i just shutoff the battery per 15 min and connect again to write the correct file.
But in this time, i can't write the correct file. What I cam make to correct it?

When my mouse have a low battery charge, it make some errors when i edit the file in winols, and was this error that change others file parts without i like.

wait for some help!!

Thanks!

:)


Title: Re: Write a wrong file on my ECU
Post by: vwaudiguy on May 14, 2016, 07:38:19 PM
Bootmode?


Title: Re: Write a wrong file on my ECU
Post by: Gulfstream on May 15, 2016, 10:39:37 AM
Bootmode?

I try with bootmode using galleto, but the galleto show that "bootmode is not active"

I make the correct process, PIN 24 to mass, the ECU enter in bootmode, but galleto don't recognizes!

have other way?


Title: Re: Write a wrong file on my ECU
Post by: Gulfstream on May 15, 2016, 01:20:39 PM
in galleto list, don't show me engine (2.8 30v)


Title: Re: Write a wrong file on my ECU
Post by: vwaudiguy on May 15, 2016, 02:06:21 PM
in galleto list, don't show me engine (2.8 30v)

Select your make, at the bottom of the list there should be 2 bootmode options.


Title: Re: Write a wrong file on my ECU
Post by: Gulfstream on May 15, 2016, 03:17:04 PM
Select your make, at the bottom of the list there should be 2 bootmode options.

I make this!

But in "Volkswagen" menu, dont appears boot mode for Me7.1.1, just in "Audi" menu, its a problem?

And always show "Boot mode inactive"


Title: Re: Write a wrong file on my ECU
Post by: Gulfstream on May 15, 2016, 03:46:03 PM
i try the NefMoto Flasher to connect in boot mode, but don't connect, just show a messagen that don' possible inicite zero byte


Title: Re: Write a wrong file on my ECU
Post by: Rl on May 15, 2016, 05:34:04 PM
I make this!

But in "Volkswagen" menu, dont appears boot mode for Me7.1.1, just in "Audi" menu, its a problem?

And always show "Boot mode inactive"

By the time you select your ecu "make" doesnt really matter. So select audi and try again.It should enter bootmode.


Title: Re: Write a wrong file on my ECU
Post by: Gulfstream on May 16, 2016, 11:22:32 AM
By the time you select your ecu "make" doesnt really matter. So select audi and try again.It should enter bootmode.

The problem was solved!

Desoldering EPROM and using a programmer.

Thanks for all!!