|
Title: Nefmoto Immo Post by: Vdub-dub on October 03, 2011, 05:26:38 AM When using this software on bench flash ecu anyway getting round the immo to use nefmoto software?? Connects just can,t read/ write to the ecu immo stopping it
Title: heywork fineRe: Nefmoto Immo Post by: NOTORIOUS VR on October 03, 2011, 05:29:57 AM i was flashing two differet cars yesterday that had immo and they work fine.
Provide more info please Title: Re: Nefmoto Immo Post by: thom337 on October 03, 2011, 07:53:01 AM He's flashing on the bench...IMMO must be bypassed or validated for flash write security access.
Title: Re: Nefmoto Immo Post by: Vdub-dub on October 03, 2011, 02:12:30 PM I can flash complete file via galletto ( boot mode) but using the nefmoto software to read validate etc requires immo defeat any way to defeat this then ???
06a 906 032 hj 0261206736 1037362287 And 8n0 906 018 j 0261206794 1037360314 Title: Re: Nefmoto Immo Post by: Vdub-dub on October 06, 2011, 12:11:47 PM so any way of defeating to IMMO with galletto??
or will i need to set up cluster and key set up adapted to ecu to work like this Title: Re: Nefmoto Immo Post by: thom337 on October 06, 2011, 03:42:09 PM you don't defeat the immo with galletto...you flash it in boot mode so it no longer requires it to be disabled.
Title: Re: Nefmoto Immo Post by: Rick on October 07, 2011, 08:08:37 AM MPPS can flash without Immo being authenticated. It tries, says immo not ready, then asks you for a power cycle. Once you've done that, it reads no problem!
Rick Title: Re: Nefmoto Immo Post by: Vdub-dub on October 07, 2011, 03:18:11 PM you don't defeat the immo with galletto...you flash it in boot mode so it no longer requires it to be disabled. I can flash with galletto no probs in boot mode but using nefmoto software where I have the problem will have a play and try what's been posted above Title: Re: Nefmoto Immo Post by: Vdub-dub on October 09, 2011, 06:57:30 AM MPPS can flash without Immo being authenticated. It tries, says immo not ready, then asks you for a power cycle. Once you've done that, it reads no problem! Rick tried nefmoto software on bench in boot mode no good just getting Starting slow init connection. Connecting to address 0x01. Slow init failed. Disconnected ???? Title: Re: Nefmoto Immo Post by: NOTORIOUS VR on October 09, 2011, 09:49:01 AM Nefmoto doesn't support boot mode... you will need another cable and software to do that.
You should really do some more reading before trying to flash an ECU. It's clear you have little knowledge about anything going on here. And that is how you mess things up. Title: Re: Nefmoto Immo Post by: Vdub-dub on October 12, 2011, 10:38:10 AM i'm just trying to learn hence why its just ecu on bench not in a car etc etc (learn for mistakes and all that ) i know nefmoto don't support boot mode just asking if they was away round it on bench. got to start somewhere, anyways thanks for peoples help
Title: Re: Nefmoto Immo Post by: NOTORIOUS VR on October 12, 2011, 01:37:14 PM there is a way around it.. and it's been said here already....
you can flash it on the bench with Galletto in boot mode. |