|
Title: getting started with ida and mpc56xx Post by: daniel on July 06, 2016, 02:41:19 AM hello Guys.
untill now i was reversing only information on vehicle bus. now i want to get startet with some code dissasembly but i'm stucked on the begining. on ida's website we can read [https://www.hex-rays.com/products/ida/processors.shtml] that professional edition is supporting motorola mpc56xx family processors. (https://s32.postimg.org/lp0lbmufp/Untitled.png) but when I starting a new project, after importing file to an ida when I'm choosing processor type from drop down list I can not find this family. On the list are only dsp family which is not what I'm looking for. (https://s32.postimg.org/5tz6ooynp/dfj.jpg) I was looking over internet for some extension, trying different versions of ida and I was unable to find solution for this. Can somebody help me with this? In revenge I can offer some help with bus RE. Best regards, daniel Title: Re: getting started with ida and mpc56xx Post by: nubcake on July 06, 2016, 04:56:35 AM Check this thread:
http://nefariousmotorsports.com/forum/index.php?topic=6834.0 Basically "PowerPC" needs to be your choice. ;) Title: Re: getting started with ida and mpc56xx Post by: daniel2345 on July 06, 2016, 07:19:37 AM A DSP is no micro. As said, try PowerPC.
Title: Re: getting started with ida and mpc56xx Post by: daniel on July 06, 2016, 10:07:19 PM ok, thaks Guys, I will analyze, try this and report conclusions in couple days ;]
|