|
Title: BDM Clone MED9.1 Post by: mightemouce on July 08, 2016, 10:02:03 AM I have a bdm100 clone that has worked flawlessly on two med9 a4 ecus, I recently picked up another two ecus and have been having issues with connecting the bdm powers up but I get a communication error. I retested a know ecu that will connect with no issues and the read out was fine.
Do later med9 2.0tfsi ecus need a newer bdm to readout ? Was thinking of purchasing the following, but before I do I would appreciate some input. I'm not ready to spend the money an evc setup unless someone can get me a good deal since this is only a hobby for me. https://www.ebay.com/itm/351762794810 Sent from my iPhone using Tapatalk Title: Re: BDM Clone MED9.1 Post by: gman86 on July 08, 2016, 10:20:32 AM Nope. All MED9.1 are same for bdm
Title: Re: BDM Clone MED9.1 Post by: vwaudiguy on July 08, 2016, 11:07:27 AM This is typical of a clone.
|