|
Title: CanClient Error: J2534 Error: CAN_ID_BOTH and CAN_29BIT_ID Post by: k0mpresd on July 09, 2016, 09:50:10 PM this is more a question of information, as opposed to any type solution.
so i have the bitbox software + rotax module. this flashes through the diag (obd) port. this works perfect with tactrix openport. i also have this drewtech cable, http://www.drewtech.com/mongoose/isocan2.html, which is described as a j2534 device. both the openport and mongoose cable seem to work for the same oem softs. however, when i use the mongoose with bitbox i receive the following error: Quote [12:11:18 AM]: Ready... [12:11:24 AM]: Identifying ECU... [12:11:24 AM]: Reading id... [12:11:24 AM]: CanClient Error: J2534 Error: CAN_ID_BOTH and CAN_29BIT_ID are the only valid ConnectFlags i contacted bitbox support to question if this is cable or bitbox issue. they told me to use openport instead. understandable, and is ok solution. i still question the original issue though. maybe someone here has more information? what are the CAN_ID error meanings? a screenshot with a bit of data and bench set up attached if interested. Title: Re: CanClient Error: J2534 Error: CAN_ID_BOTH and CAN_29BIT_ID Post by: k0mpresd on July 09, 2016, 10:54:29 PM the pinout is the same for the openport and mongoose cable.
openport: https://goo.gl/bmJkgc mongoose: http://goo.gl/PVf4fT Title: Re: CanClient Error: J2534 Error: CAN_ID_BOTH and CAN_29BIT_ID Post by: Geremia on July 21, 2016, 01:44:33 AM Code: ///////////////////////// Some flags are vendor specific and i think the error description you get comes from mongoose dll. Title: Re: CanClient Error: J2534 Error: CAN_ID_BOTH and CAN_29BIT_ID Post by: k0mpresd on July 21, 2016, 07:17:53 AM thank you. cheers.
Title: Re: CanClient Error: J2534 Error: CAN_ID_BOTH and CAN_29BIT_ID Post by: wertex on November 03, 2016, 02:28:51 PM Some True J2534 adapters are check many conditions. Openport2 does not make checks, like other True J2534 devices. I suppose, that bitbox software bitbox have some bug in routine connection to CAN bus. Mongoose detect invalid connections parameters, but Openport can't detect this invalid connections parameters. In this case bitbox will work with Openport2, but does not work with True J2534 Mongoose.
|