|
Title: Flash change issue Post by: overspeed on July 13, 2016, 12:43:02 PM Just to help in case someone got in some like this
Had an 8L S3 here yesterday, used old ole MPPS: - read by OBD OK, try to write with MPPS but it stuck in 800C... - take fuse off and try again, and again stuck in 800C... - try with old 1260 Galetto and it said it cant erase flash. take ECU out and find an "no-AMD" 29F800AB there. Even boot mode didn´t work either, had to desolder and after putting an AMD29F800BB there it back to work by OBD |