|
Title: audi TT180 me7 with 29f400 Post by: alex-84 on July 16, 2016, 08:42:48 AM hello
i'm french so sorry for my not very good english... 2 years ago i've tuned my 1.8t with ECM, it's working good but now i want more power, and ecm found a small number of maps so i tried to go to winols or tunerpro but i have only work on this with old PSA MP3.2 ecu's, and ME7.5 is very more dificult i haven't find def's for my stock bin, it's a 512kb bin: 8N0906018Q 0003 HW: 0261206439 SW: 1037352763 is there another bin i can flash in my ecu and who have an existing xdf definition file? Title: Re: audi TT180 me7 with 29f400 Post by: littco on July 16, 2016, 09:46:20 AM hello i'm french so sorry for my not very good english... 2 years ago i've tuned my 1.8t with ECM, it's working good but now i want more power, and ecm found a small number of maps so i tried to go to winols or tunerpro but i have only work on this with old PSA MP3.2 ecu's, and ME7.5 is very more dificult i haven't find def's for my stock bin, it's a 512kb bin: 8N0906018Q 0003 HW: 0261206439 SW: 1037352763 is there another bin i can flash in my ecu and who have an existing xdf definition file? Not sure if you can flash the 018f but its similar and you can use it to find maps. attached is the ols file Title: Re: audi TT180 me7 with 29f400 Post by: alex-84 on July 17, 2016, 02:03:59 AM thank's
I ordered a PSOP44 support in case of crash and another problem, every time I flash my ECU and even if I flash the same bin (with kess official v2) the car goes wrong, unstable idle and lack of power, it gradually disappears after a hundred kilometers, this can come from fuel trim adjustment? (The car turns with e85) |