|
Title: me7logger not working Post by: ianpgonzaga on July 22, 2016, 11:53:50 PM Hi all
hope you can help i have an audi s3 8l and i can't get the logger to work i'm using a ross-tech full version cable here's a screenshot so i installed VCP, changed com port etc. - tried connecting with car off - it's fine, as soon as i turn the key it disconnects - car on and try to connect - doesn't work - engine on, pull fuse, and try to connect - i get this error where it tries but fails what else can i do? Title: Re: me7logger not working Post by: atdub on July 25, 2016, 08:35:16 PM Check your template, close all other controllers and try giving it a another go :-\...
Title: Re: me7logger not working Post by: nubcake on July 28, 2016, 02:36:25 AM Try using double init (search around the board for more info).
Title: Re: me7logger not working Post by: ianpgonzaga on July 30, 2016, 08:11:35 PM thanks guys
i think i'm going to wait for the ebay F23xx cable to arrive before trying again :D will search double init now though. Title: Re: me7logger not working Post by: atdub on August 10, 2016, 07:59:27 PM Ru The Canadian gonzo?
Title: Re: me7logger not working Post by: ianpgonzaga on August 13, 2016, 05:09:29 AM no i'm the australian gonzo
lol i have received my cable and am not having any luck with it either same thing happens i tried searching "double init" and come up with nothing relevant... Title: Re: me7logger not working Post by: nubcake on August 13, 2016, 01:56:27 PM Quote - connection method "double slowinit" added (helps with "instrument cluster" problem) To use double slowinit set in the [Communication] section of the .ecu file: Connect = SLOW-0x00 DoubleDelay = 12 ; Possible values 1 .. 100 (delay in 100ms) This only allows to connect while engine not yet started. Worked for me with DoubleDelay set at 50. Turn ignition on, connect logger, start engine. Title: Re: me7logger not working Post by: prj on August 13, 2016, 06:37:25 PM Set method to SLOW-0x00.
Turn ignition on, connect. If it runs, you are in business. If it keeps disconnecting and you are on the older cluster, set the speed to 10400 baud. After that it will work. The binary can be patched to allow this method to connect with engine running (some RPM > 0 checks have to be patched). This is pretty much required on the older cluster since the connection is not very stable. Title: Re: me7logger not working Post by: ianpgonzaga on October 19, 2016, 12:07:43 AM thanks for the help guys
a friend who borrowed my cable gave me a tip - open nefmoto - connect nefmoto - disconnect nefmoto (but leave it open) - open and connect me7logger for the first time in a year and a half i was able to actually log!!! exciting times Title: Re: me7logger not working Post by: prj on October 26, 2016, 12:22:33 AM thanks for the help guys a friend who borrowed my cable gave me a tip - open nefmoto - connect nefmoto - disconnect nefmoto (but leave it open) - open and connect me7logger for the first time in a year and a half i was able to actually log!!! exciting times If you set it to double slow init, that's exactly what it will do by itself. Title: Re: me7logger not working Post by: ianpgonzaga on November 11, 2016, 01:27:54 AM ok just changing the SLOW-0x11 to 0-00 worked for me
i tried putting in Double init but the file wouldn't work. and i didn't realise you needed to edit the .ecu file to find what needed changing all good now though thanks all :) Title: Re: me7logger not working Post by: prj on November 11, 2016, 01:50:45 AM ok just changing the SLOW-0x11 to 0-00 worked for me That's what SLOW-0x00 does, double slow-init.i tried putting in Double init but the file wouldn't work. and i didn't realise you needed to edit the .ecu file to find what needed changing all good now though thanks all :) |