NefMoto

Technical => Reverse Engineering => Topic started by: Teitek on August 06, 2016, 11:38:21 AM



Title: Hard LaunchControl for MED17... problems...
Post by: Teitek on August 06, 2016, 11:38:21 AM
Hi.

I'm trying to write code for launch control in MED17.
i saw that not exists the RAM variable TSRLDYN for ignition cut, then i'm using SZOUT_W for set to 0 % the dwell coil and this work good.

After, for ignition delay, i'm using ZWOUT,ZWZYL1,ZWIST and ZWOUTCPL that is the complement of zwout for monitoring when the launchcontrol is active.

In logs you can see that ignition delay and injection time

The problem that i see is that not exists suficient richment for produce bangs. (there isnt smoke when launch is active), and i dont really know how to do it.

What map/variable can i use for increase fuel?, or how can do it.

In MED9 using tsrlyn and zwnws is sufficient for produce bangs.

if somebody can help me i will be very grateful.

Thank you and sorry for me english.