|
Title: mk3 auq conversion, having problems immo off Post by: spannermonkeyboy on August 07, 2016, 01:37:12 PM hi everyone,having problems using cmd and argdubs software trying to immo off.never done anything like this before and im lost!
managed to connect nefmoto, got immobiliser not authenticated. not sure if im in bootmode although when i try , nefmoto wont connect? struggling using cmd keep getting , system cannot find path specified im probably doing something wrong! not sure if its my commands or im not getting into bootmode or something else! Title: Re: mk3 auq conversion, having problems immo off Post by: jogtx16v on August 07, 2016, 04:03:35 PM post the command line you use in argdubstool or screenshoot please
Title: Re: mk3 auq conversion, having problems immo off Post by: spannermonkeyboy on August 08, 2016, 08:06:03 AM hi thanks for replying, ive tried quite a few variations
C:\Users\scotty>C:\Users\Desktop\me7_95040 --bootmode -r -p 3 95040.bin Title: Re: mk3 auq conversion, having problems immo off Post by: nubcake on August 08, 2016, 03:11:56 PM hi thanks for replying, ive tried quite a few variations C:\Users\scotty>C:\Users\Desktop\me7_95040 --bootmode -r -p 3 95040.bin if cmd prompt is open with "C:\Users\scotty>", try: cd desktop press <enter> me7_95040 --bootmode -r -p 3 95040.bin <enter> again Title: Re: mk3 auq conversion, having problems immo off Post by: nyet on August 08, 2016, 03:24:03 PM hi thanks for replying, ive tried quite a few variations C:\Users\scotty>C:\Users\Desktop\me7_95040 --bootmode -r -p 3 95040.bin So are you going to copy/paste the results so we can answer your question? Title: Re: mk3 auq conversion, having problems immo off Post by: adam- on August 08, 2016, 11:52:42 PM How do you know it's port 3? Is the argument R not for read? You don't read in bootmode. Is the ECU even in bootmode?
Title: Re: mk3 auq conversion, having problems immo off Post by: spannermonkeyboy on August 09, 2016, 10:32:30 AM Hi everyone, sorry for late reply, I gave up in the end!
Ended up taking eeprom off the board and flashing it using x prog It starts and runs fine now! Title: Re: mk3 auq conversion, having problems immo off Post by: turboat on August 09, 2016, 02:34:34 PM How do you know it's port 3? Is the argument R not for read? You don't read in bootmode. Is the ECU even in bootmode? Fairly sure one of my ECUs will only read in bootmode... Title: Re: mk3 auq conversion, having problems immo off Post by: adam- on August 10, 2016, 12:01:54 AM All the 1.8t ECUs I've read have always read normally booted.
|