|
Title: Interchangeable ME7.5 ECUs 0261206269 06A906032AF Post by: mechanic on August 08, 2016, 06:46:58 AM Hi guys,
Which ME7.5 would be interchangeable with 0261206269 06A906032AF?? Title: Re: Interchangeable ME7.5 ECUs 0261206269 06A906032AF Post by: mechanic on August 14, 2016, 04:51:28 AM Anyone?
Title: Re: Interchangeable ME7.5 ECUs 0261206269 06A906032AF Post by: _nameless on August 14, 2016, 06:07:40 AM It's a narrowband ecu so most likely narrowband mk4 year 2000ish? I'd ditch the narrowband, swap in a wideband ecu and o2 sensor ad a few wires to the large loom plug and run wideband setup. Code out vvt and use a better defined wideband file. Just my opinion
Title: Re: Interchangeable ME7.5 ECUs 0261206269 06A906032AF Post by: Carsinc on August 14, 2016, 04:52:07 PM Well I'm going to agree with Marty swtich to wideband, use the HS file and be a happy man.
Title: Re: Interchangeable ME7.5 ECUs 0261206269 06A906032AF Post by: mechanic on August 15, 2016, 05:04:27 AM Well I'm going to agree with Marty swtich to wideband, use the HS file and be a happy man. OK, guys I have WB ECU and sensor already.What's the easiest way to convert? I have googled already and there are several old topics about conversion, people are playing with resistors on VVT wiring etc... Basically WB sensor wiring is what I need, VVT can be disabled in the ROM file, yes? Title: Re: Interchangeable ME7.5 ECUs 0261206269 06A906032AF Post by: Carsinc on August 15, 2016, 07:03:21 AM Yes vvt can be coded out, the resitors are used when the tuner either cannot or does not remove the vvt
from the ESKNOF. A tune for one of these is alittle more advanced than the normal stage one, as some times maf tables are different from wide band to narrow band. Title: Re: Interchangeable ME7.5 ECUs 0261206269 06A906032AF Post by: mechanic on August 15, 2016, 02:15:47 PM Update: I have fitted "wideband type" ME7.5 ECU with 800BB/1MB chip. Immo Off EEPROM which I found in nefmoto was loaded with exe tool in CMD and 06A906032HS file loaded in bootmode. Now I have some problems:
1. Car starts, but only idles, I am not able to make TB alignment; 2. I can't recode ECU, as car is Euro A3 I tried 06A906032HP file, still no success, ECU doesn't accept new coding. Same problem with TB alignment. What might be wrong? As I understand there is some kind of incompatibility. ??? |