NefMoto

Technical => Flashing and Chipping => Topic started by: pikeyvw on August 10, 2016, 04:17:16 PM



Title: mk4 auto tiptronic to 5 speed manual swap coding
Post by: pikeyvw on August 10, 2016, 04:17:16 PM
hey, friend of mine told me about this page, i just recently completed swapping my 2005 mk4 1.8t gli from auto tiptronic (worn out) to a 5 speed manual (reliable and plenty around) i work for a well known Vw/Audi shop in Columbus, Ohio. and have had my work mates try coding it aswell as my self and can not get it to accept the coding, then a friend told me about this site, can and guide me in the direction for the program i need to complete my swap.

also my ecm part number is 06a906032SL

 
all help is much appreciated, thank you


Title: Re: mk4 auto tiptronic to 5 speed manual swap coding
Post by: fknbrkn on August 10, 2016, 04:53:35 PM
you should flash it with manual trans file
and then you`re finally able to recode it with xxx5x to xxx0x for 5-speed and xxx1x for a 6 speed trans.
HN file is good choice
dont forget to disconnect the TCU from harness