|
Title: Knock sensor g61 signal too low Post by: jogtx16v on August 23, 2016, 02:52:51 PM I got this fault code sometime. I have the car over 5years now and never find why this code occur.
16711 - Knock Sensor 1 (G61): Signal too Low P0327 - 35-00 - - The car is vw jetta 1.8t 2002 thing I have do to find the issue. -some used knock sensor torqued at 20nm -New knock sensor for dealer torqued at 20nm -Wiring from knock sensor to ecu plug tested very good in ohms -tested couple other ecu's I need help, can datalogging of knock voltage can help to see what happen ? Title: Re: Knock sensor g61 signal too low Post by: jogtx16v on August 24, 2016, 09:34:01 AM I search for all possible cause. desesperate :-\
Title: Re: Knock sensor g61 signal too low Post by: 10101011 on August 24, 2016, 10:39:37 AM I have seen in the past when the other knock sensor (G66) is reading high but the computer gets confused and post a fault code for " SIGNAL TOO LOW " for the other sensor (G61) .
Title: Re: Knock sensor g61 signal too low Post by: overspeed on August 24, 2016, 12:04:26 PM I have seen in the past when the other knock sensor (G66) is reading high but the computer gets confused and post a fault code for " SIGNAL TOO LOW " for the other sensor (G61) . Me too... but not in all Sw versions it occurs... it shall have some kind of filter, but I´m too lazy to look for in german FR :D |