|
Title: 8D0907551M - ESKONF location Post by: SB_GLI on August 24, 2016, 11:16:22 AM I feel silly asking for this because I am sure it's on here somewhere, but can someone please give the location of the 13byte ESKONF map in this file?
Bonus points for posting the stock hex of this map. 8D0907551M 01 0261207143-1037-360857 0002 6mt NA S4 APB Title: Re: 8D0907551M - ESKONF location Post by: k0mpresd on August 24, 2016, 11:36:31 AM wiki?
Quote Finally if you intend to disconnect the sensors, configure ESKONF (13 bytes starting at 0x10C75):[60]. If you intend to leave the sensors installed and connected, there is no need to disable circuit diagnosis. ESKONF[5] (0x10C7A) - set to 0xC0 (set bits 6 and 7) ESKONF[6] (0x10C7B) - set from 0xF3 to 0xFF (M-box) (set bits 2 and 3) ESKONF[6] (0x10C7B) - set to 0xC3 to 0xCF (L-box) (set bits 2 and 3) Title: Re: 8D0907551M - ESKONF location Post by: SB_GLI on August 24, 2016, 11:45:24 AM It was hidden! But now you can search on NEF and find it too!
I will follow up with my own bonus points later. Thanks k0mpresd! stock hex for reference: 00 FC E3 FF 3C 00 F3 FF AA FA 55 55 55 Title: Re: 8D0907551M - ESKONF location Post by: cbr- on June 22, 2017, 09:14:47 AM Is that change correct to disable EVAP ?
|