Title: soft launch 1.8t A4Q 518AK Post by: seany260 on September 07, 2016, 05:46:18 AM i would appreciate it if someone could please confirm my locations for soft launch control. I used the fully defined CB ols file to compare to my file and get locations but I cannot get it to activate. If anyone can think of any other reason why I cant get it to work let me know and ill look into it, thanks.
Also I Don't believe that CWNMAXMD is used in my file from what I have been reading on the forum. VNMX (11DA3) 1.25 km/h. DNMAXH (1687E) set to 50RPM ITNMXH (16882) set to 0 seconds NMAX (1687A) Set to 4500RPM NMAXOG (168AA) set to 7000 RPM TMOTNMX (29EFA) set to -48 TNMXH (168AE) set to 655.3500 seconds. sean Title: Re: soft launch 1.8t A4Q 518AK Post by: guitar24t on September 12, 2016, 08:37:39 PM i would appreciate it if someone could please confirm my locations for soft launch control. I used the fully defined CB ols file to compare to my file and get locations but I cannot get it to activate. If anyone can think of any other reason why I cant get it to work let me know and ill look into it, thanks. Also I Don't believe that CWNMAXMD is used in my file from what I have been reading on the forum. VNMX (11DA3) 1.25 km/h. DNMAXH (1687E) set to 50RPM ITNMXH (16882) set to 0 seconds NMAX (1687A) Set to 4500RPM NMAXOG (168AA) set to 7000 RPM TMOTNMX (29EFA) set to -48 TNMXH (168AE) set to 655.3500 seconds. sean You have a couple addresses incorrect: NMAX: 0x168A2 TMOTNMX: 0x29F8A CWNMAXMD: 0x11D93 Title: Re: soft launch 1.8t A4Q 518AK Post by: seany260 on September 16, 2016, 12:48:46 AM Thank you for your reply, I'll have another play over the weekend.
|