|
Title: **V8 S4-T**Real Time o2 Corrections works one pull, then flat lines on others... Post by: q_dubz on September 08, 2016, 08:43:36 PM Got a new problem!
So i did a 1st, 2nd, and part of 3rd gear pull and found that my o2 corrections flat lined so a/f is not meeting target. I did a 3rd gear pull a lil later and o2 correction worked fine! What gives? https://youtu.be/7TBbugfdTkE Title: Re: **V8 S4-T**Real Time o2 Corrections works one pull, then flat lines on others... Post by: q_dubz on September 08, 2016, 09:04:40 PM OH YEA!...i'm willing to bet it's my rear o2's being jerks. Coding them out tomorrow.
Title: Re: **V8 S4-T**Real Time o2 Corrections works one pull, then flat lines on others... Post by: q_dubz on September 15, 2016, 05:34:59 AM Fixed
Title: Re: **V8 S4-T**Real Time o2 Corrections works one pull, then flat lines on others... Post by: nubcake on September 15, 2016, 01:32:57 PM Fixed You know, it actually would help others if you posted the solution. Why bother updating the "status" when you're not posting what you did? Title: Re: **V8 S4-T**Real Time o2 Corrections works one pull, then flat lines on others... Post by: q_dubz on September 15, 2016, 05:32:32 PM You know, it actually would help others if you posted the solution. Why bother updating the "status" when you're not posting what you did? you know what...you're RIGHT! LRS 27.20 Continuous Lambda Control 816C94 Minimum Measurable Lambda was set to .80Lambda I lowered that value and turned off rear o2 correction. |