NefMoto

Technical => Tuning => Topic started by: vdubnation on September 09, 2016, 09:37:13 PM



Title: What causes load to
Post by: vdubnation on September 09, 2016, 09:37:13 PM
What are some of the reasons load would do this anyone seen this ? I know MAF reading is jagged up top.


Title: Re: What causes load to
Post by: vwaudiguy on September 09, 2016, 09:41:05 PM
Audi TT?


Title: Re: What causes load to
Post by: nyet on September 09, 2016, 09:44:39 PM
5120 hack?


Title: Re: What causes load to
Post by: vwaudiguy on September 09, 2016, 09:51:21 PM
It is interesting right where it cuts off. Yes, this is a 5120 file. Unless your statement was it was because it was a 5120 file. Possibly an improperly converted one?


Title: Re: What causes load to
Post by: vdubnation on September 09, 2016, 10:09:10 PM
Yes its a big turbo 1.8t 5120'd working off a know good 5120 base.


Title: Re: What causes load to
Post by: vwaudiguy on September 09, 2016, 10:10:53 PM
Might help if we had a complete log to look at.  :)


Title: Re: What causes load to
Post by: vdubnation on September 09, 2016, 10:11:29 PM
just another view


Title: Re: What causes load to
Post by: nyet on September 09, 2016, 11:50:00 PM
Massive boost leak or dv failure?


Title: Re: What causes load to
Post by: littco on September 10, 2016, 02:12:44 AM
just another view
Whats the throttle doing at this point? did you log the throttle?


Title: Re: What causes load to
Post by: q_dubz on September 10, 2016, 08:36:30 AM
My load would do that exact thing. It was a Maximum MAF diagnostic limit.


Title: Re: What causes load to
Post by: littco on September 11, 2016, 11:30:26 AM
My load would do that exact thing. It was a Maximum MAF diagnostic limit.

That was my thought as well

KFMLDMX (diag) or MLMAX( maf max limit)


Title: Re: What causes load to
Post by: q_dubz on September 11, 2016, 03:05:46 PM
this


Title: Re: What causes load to
Post by: vdubnation on September 11, 2016, 08:36:28 PM
figured it out bad map sensor


Title: Re: What causes load to
Post by: vwaudiguy on September 11, 2016, 09:31:00 PM
figured it out bad map sensor

How were you getting actual boost pressure graphed in the first graph? Love to see a log.


Title: Re: What causes load to
Post by: nyet on September 11, 2016, 11:13:39 PM
5120 file


Title: Re: What causes load to
Post by: vwaudiguy on September 11, 2016, 11:16:53 PM
5120 file

Yes, I know. But he said he had a bad map sensor.