NefMoto

Technical => Tuning => Topic started by: Chris123 on September 12, 2016, 10:20:32 AM



Title: Removal DTC P3101 and P3102 from EDC15P+: Need help
Post by: Chris123 on September 12, 2016, 10:20:32 AM
Hello,

i want to remove two DTC's (P3101 and P3102).
Could someone remove help me, where to find and coding out these DTC's?

I don't know how to start  ???

Thanks


Title: Re: Removal DTC P3101 and P3102 from EDC15P+: Need help
Post by: Chris123 on September 12, 2016, 11:50:09 AM
I searched for an hexadecimal value of 3101 and found it more than one time in the file.

My problem is, how to find the right value (or how to find right DTC code table)


Title: Re: Removal DTC P3101 and P3102 from EDC15P+: Need help
Post by: vwaudiguy on September 12, 2016, 01:39:57 PM
There's one or two threads on this forum that describe how to figure out the locations. Is this file the updated version?


Title: Re: Removal DTC P3101 and P3102 from EDC15P+: Need help
Post by: Chris123 on September 13, 2016, 12:14:52 AM
Yes it is. It's the Updates file with SG7332.
I know one of the threads for locating DTC. But i can't find it in my file. I generated some errors to validate the correct location by compare some files with and without errors.

But it's hard for me to locate DTC table start reliable because there are to many differences between my files.


Title: Re: Removal DTC P3101 and P3102 from EDC15P+: Need help
Post by: pyter on September 13, 2016, 01:09:28 AM
Hello,

i want to remove two DTC's (P3101 and P3102).
Could someone remove help me, where to find and coding out these DTC's?

I don't know how to start  ???

Thanks

Checksum you must do
 


Title: Re: Removal DTC P3101 and P3102 from EDC15P+: Need help
Post by: pyter on September 13, 2016, 01:13:30 AM
Checksum you must do
 

Here with checksum


Title: Re: Removal DTC P3101 and P3102 from EDC15P+: Need help
Post by: Chris123 on September 13, 2016, 07:31:30 AM
Thank you for disable DTC's.

I read the file to see the location where DTC's were disabled, but i can't reproduce to find the location by myself.
I know that i need to look for the hexadecimal value of 3101 or 3102 and the beginning of the DTC table ??? .


You can help me greatly if you could tell me how you found the correct position in file of P3101 and P3102?




Title: Re: Removal DTC P3101 and P3102 from EDC15P+: Need help
Post by: pyter on September 13, 2016, 08:34:47 AM
Thank you for disable DTC's.

I read the file to see the location where DTC's were disabled, but i can't reproduce to find the location by myself.
I know that i need to look for the hexadecimal value of 3101 or 3102 and the beginning of the DTC table ??? .


You can help me greatly if you could tell me how you found the correct position in file of P3101 and P3102?




P3101 19557   (529A8+729A8 2x1 16bitLoHi)           48 48   --> 65535 0
P3102 19558   (52978+72978 2x1 16bitLoHi)          0 65535 --> 65535 0

DTCRemover 1.8.0 do this auto.for me
Regards


Title: Re: Removal DTC P3101 and P3102 from EDC15P+: Need help
Post by: nyet on September 13, 2016, 10:37:09 AM
P3101 19557   (529A8+729A8 2x1 16bitLoHi)           48 48   --> 65535 0
P3102 19558   (52978+72978 2x1 16bitLoHi)          0 65535 --> 65535 0

DTCRemover 1.8.0 do this auto.for me
Regards

And you have no idea what side effects disabling DTCs this way will have.


Title: Re: Removal DTC P3101 and P3102 from EDC15P+: Need help
Post by: Chris123 on September 13, 2016, 11:55:43 AM
What are the effects?
Could you tell me please?
The v157 flap has no implementation ob the BHC Engine in non DPF mode.
Only for smooth shut down.

Is this right?


Title: Re: Removal DTC P3101 and P3102 from EDC15P+: Need help
Post by: nyet on September 13, 2016, 11:58:26 AM
What are the effects?
Could you tell me please?
The v157 flap has no implementation ob the BHC Engine in non DPF mode.
Only for smooth shut down.

Is this right?

I should clarify: I don't know for certain about this particular DTC, but each one is different, and just masking error conditions often hides other issues arising from missing (or malfunctioning) hardware.


Title: Re: Removal DTC P3101 and P3102 from EDC15P+: Need help
Post by: pyter on September 13, 2016, 12:10:23 PM
And you have no idea what side effects disabling DTCs this way will have.

sorry but i realy have no idea how to finde this manual - I have testet anytimes but always different  :'(


Title: Re: Removal DTC P3101 and P3102 from EDC15P+: Need help
Post by: Chris123 on September 13, 2016, 11:29:08 PM
That' my problem, too.
I won't use a DTC-Remover tool, because my target is to learn the relationsships inside the files.

And for this i try to learn finding manual by myself, but that is difficult yet for me. I'll do my best to learn it...