|
Title: Car Starts- Can't connect with Vag or Nefmoto Post by: iNSTRUCT on November 04, 2011, 08:25:47 PM Like the topic says- Is it possible if one of the connectors touches a nearby pin, specifically pin 21 or 62 it will cause this issue?
(http://wiki.obdtuning.com/images/a/ac/VAG_ME7.x.jpg) I don't think pin 1 & 2 have touched 3. Thanks in advance. Title: Re: Car Starts- Can't connect with Vag or Nefmoto Post by: iNSTRUCT on November 04, 2011, 10:34:27 PM Since I was using alligator clips I think it's possible 21 or 62 touched 43- Is it possible I could have fried the communication controller?
Title: Re: Car Starts- Can't connect with Vag or Nefmoto Post by: iNSTRUCT on November 05, 2011, 02:08:30 PM Looks like my blue vag cable has died - still curious about the answer.
Title: Re: Car Starts- Can't connect with Vag or Nefmoto Post by: iNSTRUCT on November 09, 2011, 06:19:54 PM Luckily the ECU was not damaged. The blue light was still lit on the old vag cable but the communication controller was shot.
Title: Re: Car Starts- Can't connect with Vag or Nefmoto Post by: Rick on November 10, 2011, 12:01:05 PM You can't damage the K-line if you have 12V on it.
Title: Re: Car Starts- Can't connect with Vag or Nefmoto Post by: iNSTRUCT on November 11, 2011, 11:58:42 AM You can't damage the K-line if you have 12V on it. Thanks. I'm now almost certain I fried it because I only connected a ground to pin 4 and forgot pin 5 on the Vag cable. |