|
Title: Problem with CRUISE CONTROL after remap Post by: dv-008 on September 25, 2016, 02:30:53 AM i remaped my car with ME7.5 and removed SAI, N112, N249 & Cat.
after remap the cruise control don´t activate any of this function/map affect to cruise control???? CDHSH CDHSHE CDHSV CDHSVE CDHSVSA CDKVS CDLASH CDLATV CDGGGTS CDLATP CLATA CDLLR CDLSA CDLSH CDLSV CDMD CDNWS CDSLS CDTANKL CDTES CWADRES CWERFIL CWGRABH CWKMMILSCT CWKONABG ref ecu: 06A906032QN attach the ori file Title: Re: Problem with CRUISE CONTROL after remap Post by: fknbrkn on September 25, 2016, 03:45:15 AM CWGRABH
code word for GRA control lever 1/3 of this list are not emission codewords wtf you are doing? Title: Re: Problem with CRUISE CONTROL after remap Post by: dv-008 on September 26, 2016, 08:17:13 AM CWGRABH code word for GRA control lever 1/3 of this list are not emission codewords wtf you are doing? thanks i have restored to ori state CWADRES CWERFIL CWGRABH CWKMMILSCT question, CDGGGTS (coolant temperature from instrument cluster) that function has exactly? Title: Re: Problem with CRUISE CONTROL after remap Post by: vwaudiguy on September 26, 2016, 08:20:45 AM You never answered his question about wtf you were doing.
Title: Re: Problem with CRUISE CONTROL after remap Post by: NOTORIOUS VR on September 26, 2016, 09:45:09 AM Did you change files (5 spd to 6 spd or other way around)?
That will also cause issues w/ cruise. Title: Re: Problem with CRUISE CONTROL after remap Post by: vvt18 on January 17, 2021, 11:38:32 AM Hi.
I had same problem after swapped 032TL with 032HS file, cruise not activated. NVQUOT are setted ok. Please guys tell me if i must change only CWGRABH to 1 for activation the cruise or must make other setup in vcds? Title: Re: Problem with CRUISE CONTROL after remap Post by: vvt18 on February 18, 2021, 06:05:06 AM I tried to activate with vcds with standard login code. vcds see it active "g" but with error "singanl intermitent".
I specify with 032tl stock code it works! Title: Re: Problem with CRUISE CONTROL after remap Post by: azza1234 on January 11, 2022, 05:37:00 PM I tried to activate with vcds with standard login code. vcds see it active "g" but with error "singanl intermitent". sorry to bring up the past :D but ive got the same error signal intermittent with retro fit cruise control what code did you use? i used theI specify with 032tl stock code it works! 11463 code and it added the "g" but still the intermittent error i also flashed my hn with hs software |