|
Title: hi cant read write Post by: Jako on September 29, 2016, 09:38:46 AM Hi there,
Im just wondering what I need to do to read & write flash. I can connect, but when I go to kw2000 flashing tab, there is read and write in grey ( both fast and slow, can't press on button) is it something wrong with my cable or my computer? I have xp. Thanks for help Title: Re: hi cant read write Post by: nyet on September 29, 2016, 09:45:35 AM You have to connect first.
Title: Re: hi cant read write Post by: Jako on September 29, 2016, 10:32:48 AM you mean press connect first? yes I did it all went good and I was connected but read write was still grey
Title: Re: hi cant read write Post by: nyet on September 29, 2016, 11:15:53 AM Did you select a file?
Title: Re: hi cant read write Post by: Jako on September 29, 2016, 11:44:07 AM I need select file to read my ecu? I want to read not to write
Title: Re: hi cant read write Post by: atdub on September 29, 2016, 12:02:00 PM I need select file to read my ecu? I want to read not to write You absolutely need to select a file to write to your ecu also make sure you have the correct memory layout. I also would strongly recommend reading Nyet links and more information on this site before attempting to do either. Title: Re: hi cant read write Post by: adam- on September 29, 2016, 12:08:49 PM He's not writing a file. You don't need to specify a file to read. There's a connect button top right, click that.
Title: Re: hi cant read write Post by: Jako on September 29, 2016, 12:25:58 PM Ok now I see I select file and memory and connected now I can press read. But before I do it what memory layout is audi a3 8l 110km asv?
Title: Re: hi cant read write Post by: adam- on September 29, 2016, 01:51:38 PM Diesel?
Title: Re: hi cant read write Post by: Jako on September 29, 2016, 05:44:42 PM yes, 81kw. I tested all and none of them working its connecting in dump mode and then stuck on reading... after 2-3 min I canceled it and try different memory layout without success. I have 2 cable vag kkl (not working) and vag-k+can(working)
Title: Re: hi cant read write Post by: adam- on September 29, 2016, 11:43:12 PM Nefmoto cannnot read diesels.
Title: Re: hi cant read write Post by: Jako on September 30, 2016, 01:00:58 AM Adam thanks for your help. Do you know any different software to read my ecu?
Title: Re: hi cant read write Post by: gman86 on September 30, 2016, 08:35:47 AM MPPS/Kess/Galetto
|