NefMoto

Hi to all members, i m new in this Word of disassemble an mcu controller. I read all of yours topic about it to applicate in some modes. But i noob and i in difficulty when i try to read an mcu bin. Can some One help me to initiate to this word?
Best regards in Advance

hi, maybe this part of the forum is not appropriate for this question, but some administrator will move the post to his section.

First you must purchase a compatible cable with flasher nefmoto if you go to use it, or galletto or similar type cable. This will help you to read your ecu by obd port.

if you are interested in doing directly to the ecu you can modify some of the above cables to make it a arness, or buy a ktag type, or the like programmer. With this option, you can recover your ecu if brick, and also you can easily read the eeprom to make immo off and more things described here forum. it is investing a lot of time reading, learning and testing. here are many people who will be glad to help you learn. greetings and good luck

a lot can understend me if you reply this. my fall. i m an ecu remapper i work a lot whit ecu and flash file. but my intresting is about decode processor and implementate more fuction in ecu. but i'm noob to do this. (sorry for my very bad english)