NefMoto

hey all,

i have a CEL that keeps poping for ABS and Airbag modules not present. i have disabled all options per my can-bus gateway, but this is in my engine ecu, not the canbus.

does anyone know what address and what to change them to iin order to disable either the ecu looking for the modules, or disable the ecu from reporting an error?

car does not have abs nor airbags...its a 1.8t swap into a mk3... full me7.5 harness tho.

Thanks in advaced?

Post your binary..

CW_CAN_R and/or CW_CAN_C most likely.

does it need to have the codes in it, on? i.e. do you need a version that i've run and popped codes for of is the one, not flashed ok?

here it is, as it sits...before writing to car and throwing codes.

editied file removed

sorry, i have no idea how to edit posts  ::) ( i know)

its 06A 032 906 HS if it matters

The flash is the same before and after writing to the car and throwing codes. It never changes on it's own. I have the locations for this, I'll take a look in a bit.

Set these two location to 00 in your file.

0x107A7
0x10802

Don't forget to checksum before flashing.

Thank you!

I would add, please do not zero out anything on someone's advice until you understand WHY you are doing it ... please at least take a peek at the FR before blinding changing things :)

Thank you.

"modify"

Thanks....i do. It's a swap into a mk3...no airbags and no abs.....check engine light off only of system disabled...it's ok :)


Sent from my iPad using Tapatalk

hey all,

i recently made a post asking someone to help me code out my abs and airbags.. now i need to delete a dtc, not the system, just the dtc( its a swap and still want the system activated as i only need the cel off for inspection( yes just the light off, readyness doesn't matter).

I read the sticky above, but i don't think it corrisponds to my ecu files.( 06A 906 032 SM )

SO is there anyone someone can explain( as direct as possible) how to find the dtc, turn it off( i image change to "00"?) and if i wanted to find the system it correspond to if i did want to try to disable the system?

or atleast just how to find the dtc and turn it off? i have the maps for it, but still dont understand how to loacate these thing)

Im trying to lern, but im a lern by example kind of guy, sorry..

thanks in advaced, if you can take a few to explain it! thanks

Here is my file, and the maps im using

well its not a good idea to use HS map pack with SM file :/
anyway http://nefariousmotorsports.com/forum/index.php?topic=567.0

Sorry, it's an hs file... I was think of what my other car when I wrote that...


Sent from my iPad using Tapatalk

This did not work? Are there other DTC's? Why not post the DTC? Don't make us beat it out of you.  ;D

hahah no it did. i made another thread but it ot closed and merged into this..... your help was perfect!

i had one more dtc to get rid of, but dont want to disable the system, just the dtcs

17834 - EVAP Purge Valve (N80): Open Circuit        P1426 - 35-00 - -
and
P2261/008801 - Boost Pressure Control Valve (N249): Mechanical Malfunction

i tried to follow the sticky, but the locations arent the same in my file. im a learn by example kinda guy... that wy i wanted someone to tell me the answer first.. then how they arrived at that answer

then thats it, i swear.....thanks for the help vwguy ;D

Bump


Sent from my iPad using Tapatalk

Either fix the problem or disable the system through ESCONF and codewords (if the hardware isn't there).

NEVER just disable the DTCs, you never know if there are side effects.

speaking on this from 2 weeks after this thread was started, i wish i picked up on that the first time around... everything is configured properly via eskonf

:thumbsup: