|
Title: Flashed to another binary for a 1.8T ECU Post by: tobz on November 11, 2011, 05:50:00 PM I know you S4 guys have all your different "boxes" and that they can flash to one another and this way and that way etc. I haven't seen much of that for us 1.8T guys, so I decided to just give it a try!
I have an 06A906032NK - 2004 Jetta 1.8T. Decided to try flashing an LP binary to my car... the LP comes from the 2003 Jetta/Golf 1.8Ts, so I figured they couldn't be much different. Didn't explicitly check the memory layout of my ECU beforehand, but I used the 800 layout, which is what the LP is listed as using... Ended up working just fine! :) Title: Re: Flashed to another binary for a 1.8T ECU Post by: AmIdYfReAk on November 11, 2011, 09:08:26 PM Glad to hear it,
i flashed a LP tune on a HS Ecu, it seemed to work fine. but after a while of driving, some weird driving issues and blowing out some crazy emissions kinda stopped me on that respect. I'm going to flash a different tune and try to confirm if it was the ECU, or the Tune that was at fault. Title: Re: Flashed to another binary for a 1.8T ECU Post by: tobz on November 20, 2011, 04:15:43 PM Glad to hear it, i flashed a LP tune on a HS Ecu, it seemed to work fine. but after a while of driving, some weird driving issues and blowing out some crazy emissions kinda stopped me on that respect. I'm going to flash a different tune and try to confirm if it was the ECU, or the Tune that was at fault. Yeah, I've definitely noticed that I have a slight rev hang when I depress the clutch... hangs around 1300 for a few seconds then drops to idle. This is, of course, with a TB that I had previously dinked around on and just gotten around to fixing.... a TBA will probably help but I never had rev hang before so I'm attributing this to the different flash. :) On another note, I also successfully flashed an HS binary to my ECU today. |