|
Title: Immo pin. What is wrong with this bin file? Post by: Slaol on October 22, 2016, 09:14:39 AM Hello,
I am trying to obtain my immo pin but the file i have extracted seems to be different from what i read. There is FF FF in place of where the pin should be. Is the data encrypted/moved around? The car was tuned by Unitronics by another owner and I read that it is possible that they may have modified things to lock the car in to their tools. Apart from the pin, i would like to know the reason the file is different if anyone knows. Audi A3 1.8T 2000 Mileage 183860km VCDS extracted data: Address 17: Instruments Part No: 8L0 920 900 C Component: AB-KOMBIINSTR. VDO D11 Coding: 23544 Shop #: WSC 00000 VCID: 2B5F1975D91E111 Component: AUZ7Z0Y1422754 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ AUZ7Z0Y1422754 Address 35: Centr. Locks Part No: 8L0 862 257 M Component: CV-Pump, Alarm, RC D11 Coding: 12804 Shop #: WSC 06435 VCID: 3F875D253D669D1 Title: Re: Post by: macxxx on October 22, 2016, 12:31:42 PM Why do you need the pin from ecu?
Title: Re: Immo pin. What is wrong with this bin file? Post by: Slaol on October 22, 2016, 07:53:06 PM I broke the rfid transponder chip while trying to do a aesthetic upgrade to my key by transplanting the guts to a new shell.
Title: Re: Post by: macxxx on October 22, 2016, 10:37:49 PM You just need the pin from cluster , luckily you have a vdo so use vag eeprom programmer 1.19 with kkl cable or K+can commander to read the cluster eeprom.
You dont need the pin from ecu Title: Re: Immo pin. What is wrong with this bin file? Post by: Zenerdiode on October 23, 2016, 04:24:07 AM Apart from the pin, i would like to know the reason the file is different if anyone knows. Yes, you have an IMMO3 ready cluster but an IMMO2 ECU - and therefore the ECU doesn't have or need to know the PIN. As suggested, VAG EEPROM Programmer 1.19g will work excellent on this cluster to extract your PIN. Title: Re: Post by: macxxx on October 23, 2016, 04:43:54 AM He's lucky to have the midline cluster by VDO , usually they are produced by Jeager/Magnetti Marelli ( piece of s*** ;) )
Title: Re: Immo pin. What is wrong with this bin file? Post by: Slaol on October 23, 2016, 07:20:01 AM Woooo!! Thanks a million.
I had an older version of K+can commander software which didnt work. Version 2.5 worked. I did however think i was reading from the cluster initially, thanks for redirecting me. Must have missed something due to stress. Immo matched with the new RFID chip. I can now also make a backup key too. Again, thanks!! |