|
Title: 2.7 biturbo 512kb ecu Post by: maluch on October 23, 2016, 11:40:21 AM Hello.
I have a A6 with the AJK 2.7tt engine with ecu 4B0907551E and auto. But the ecu is fried, and I have to get a used one. Can I buy a 1mb from a another A6 2.7tt and use that, the deal here is that the engine is going in to a another car, with manual gearbox and no abs/esp. Thanks, Joakim Title: Re: 2.7 biturbo 512kb ecu Post by: ktm733 on October 23, 2016, 12:04:14 PM Yes but you need to program ecu correctly for esp ect. Also you need to know if your maf is and program ecu accordingly. I might be missing a couple things but this should get you up and running.
Title: Re: 2.7 biturbo 512kb ecu Post by: ktm733 on October 23, 2016, 12:04:51 PM Also your topic says 512? You're a 1mb file
Title: Re: 2.7 biturbo 512kb ecu Post by: maluch on October 24, 2016, 09:58:32 AM ok, thanks.
but according to this page http://nyet.org/cars/files/stock/part-numbers.txt (http://nyet.org/cars/files/stock/part-numbers.txt) it is a 512 ecu, and it have a am29f400bt installed in it. I have bosch MAF. is it possible also to use another bin file from another ecu? and s4 file? thanks Title: Re: 2.7 biturbo 512kb ecu Post by: nyet on October 24, 2016, 10:49:39 AM You can use any 512k file in that ecu, or buy another ecu (512k or 1mb) and flash it with your ORI or your ORI doubled up to 1m
Or run a bosch file (1m) from another ecu Or run a hitachi file (1m) from another ecu and copy the MAF maps over. you will likely need to perform an engine coding via VCDS unless you match ecu/file 1:1 Title: Re: 2.7 biturbo 512kb ecu Post by: ktm733 on October 24, 2016, 05:01:44 PM Didn't know there was a 2.7t with a 512mb? Is that only in Europe?
Title: Re: 2.7 biturbo 512kb ecu Post by: nyet on October 24, 2016, 06:18:40 PM Didn't know there was a 2.7t with a 512mb? Is that only in Europe? Did you read this, linked above? http://nyet.org/cars/files/stock/part-numbers.txt Title: Re: 2.7 biturbo 512kb ecu Post by: ktm733 on October 24, 2016, 06:31:17 PM ?
Title: Re: 2.7 biturbo 512kb ecu Post by: nyet on October 24, 2016, 07:30:42 PM Nope, nyet... Are you an actual human being? DUDE it is fucking linked a few messages up. ok, thanks. for fucks sake I swear to god you frustrate me to no end.but according to this page http://nyet.org/cars/files/stock/part-numbers.txt (http://nyet.org/cars/files/stock/part-numbers.txt) it is a 512 ecu, and it have a am29f400bt installed in it. I have bosch MAF. is it possible also to use another bin file from another ecu? and s4 file? thanks Title: Re: 2.7 biturbo 512kb ecu Post by: ktm733 on October 24, 2016, 07:59:13 PM You know I've already read through the list right? Humor wasn't sensed I guess.
Title: Re: 2.7 biturbo 512kb ecu Post by: maluch on October 25, 2016, 12:20:53 AM okay. Thank you! Will check ebay for a spare one then! :)
|