NefMoto

Noob Zone => Noob Questions => Topic started by: aef on October 23, 2016, 11:45:46 PM

Title: no ignition, ecu broken
Post by: aef on October 23, 2016, 11:45:46 PM

Hi,

there was a thread once.....
Someone managed to swap a broken part inside the ecu to have the ecu working again.
I have a 032HN ecu without ignition / coil pack drivers.

Can someone remember the thread name or something?

Title: Re: no ignition, ecu broken
Post by: eliotroyano on October 24, 2016, 06:41:25 AM

Quote from: aef on October 23, 2016, 11:45:46 PM

Maybe this info --> http://nefariousmotorsports.com/forum/index.php?topic=10619.msg92066#msg92066 (http://nefariousmotorsports.com/forum/index.php?topic=10619.msg92066#msg92066) can help you ;) ;) ;)

Title: Re: no ignition, ecu broken
Post by: aef on October 28, 2016, 06:43:16 AM

Thanks, i have the ecu on my desk.

It looks fine from the inside. nothing burnt or something.
Will try to measure and compare the 30397 with another ecu.

regards

Title: Re: no ignition, ecu broken
Post by: eliotroyano on October 28, 2016, 10:20:24 AM

Quote from: aef on October 28, 2016, 06:43:16 AM

Thanks, i have the ecu on my desk.
It looks fine from the inside. nothing burnt or something.
Will try to measure and compare the 30397 with another ecu.
regards

Try to check power diodes first? check that whole ECU, VCC line around ICs is energized. That ECU communicates with VCDS under diagnostic port?

Title: Re: no ignition, ecu broken
Post by: aef on October 29, 2016, 12:07:38 AM

Yes is can read/write with different tools, vcds works fine, no dts with ecu in the car. Only problem is that there is no ignition.
Tried different ecus and this ecu in different cars. I dont really know what to check next.

Title: Re: no ignition, ecu broken
Post by: eliotroyano on October 29, 2016, 07:42:24 PM

Quote from: aef on October 29, 2016, 12:07:38 AM

I will try changing Bosch 30397 IC.