NefMoto

Technical => Tuning => Topic started by: Apsik on October 25, 2016, 01:50:06 PM



Title: 3B0907552BK 0002 Audi 2.4 V6 - Rear O2 OFF - CLRHK location
Post by: Apsik on October 25, 2016, 01:50:06 PM
Hi

I've been working on 3B0907552BK lately removing rear O2 sensors and cats from the software.
I did follow S4wiki and serched the forum but still can't locate CLRHK & CLRKA

My file together with kp is attached.

There is one more thing I want to share.
This car had 1037362350_0001 software and I flashed it with 1037363445_0002. Idle misfire is gone and acceleration is smoother.


Title: Re: 3B0907552BK 0002 Audi 2.4 V6 - Rear O2 OFF - CLRHK location
Post by: nubcake on October 26, 2016, 03:21:51 AM
still can't locate CLRHK & CLRKA

Tried this (http://nefariousmotorsports.com/forum/index.php?topic=2703.0)?


Title: Re: 3B0907552BK 0002 Audi 2.4 V6 - Rear O2 OFF - CLRHK location
Post by: Apsik on October 26, 2016, 06:46:08 AM
THANKS ... it was so obvious
CLRKA=0x12111 (value 0x00 - this is little strange)
CLRHK=0x120FC (value 0x03)


Title: Re: 3B0907552BK 0002 Audi 2.4 V6 - Rear O2 OFF - CLRHK location
Post by: macxxx on October 28, 2016, 02:19:11 PM
have the same values in places found by maplocator  , my ECU is 3b0907552AP ( engine code AML , MY2001 , multitronic gearbox ) 


Title: Re: 3B0907552BK 0002 Audi 2.4 V6 - Rear O2 OFF - CLRHK location
Post by: aleks19411 on September 12, 2019, 01:20:39 AM
THANKS ... it was so obvious
CLRKA=0x12111 (value 0x00 - this is little strange)
CLRHK=0x120FC (value 0x03)

I apologize for raising the old topic, but to make it clear, I designated the locations of the rear sensors