|
Title: EDC17 Readiness Monitor Alteration Post by: HelperC on November 01, 2016, 09:47:48 AM Hi everyone,
I was wondering if there is anyone out there that can help me with setting readiness monitors on an edc17 file to always showing "pass" or "not installed" but preferably the first. I have removed DPF and EGR from a CBEA engine from a 2009 Jetta TDI and have installed it into my 2009 GTI. The car runs fine with no issues and I have already deleted the EGR and DPF from the file but now I am dealing with an "incomplete" code always and need to see if anyone has any knowledge or can steer me in the right direction to either nulling out the monitors for dpf and egr or if possible setting these monitors to a passed state. I will attach my stock unaltered file for your viewing. Any and all help would be greatly appreciated, if need be I will pay for help. Title: Re: EDC17 Readiness Monitor Alteration Post by: gman86 on November 01, 2016, 10:07:53 AM Sorry, wut? You've removed a DPF and EGR valve from a TDI engine and put it on a petrol engine?? Or you've swapped the engine in?
Title: Re: EDC17 Readiness Monitor Alteration Post by: HelperC on November 01, 2016, 10:53:19 AM I put a CBEA Engine so CR140 Common Rail 2.0 TDI into a 2009 GTI Petrol Car. I removed DPF and EGR off that engine before I installed into the petrol car.
Title: Re: EDC17 Readiness Monitor Alteration Post by: prj on November 02, 2016, 12:55:29 AM Post file with your deletes as well.
|