|
Title: Need some help, trying to locate ESKONF in Audi A6 allroad 2.7T 263HP 4Z7907551N Post by: brodway2800 on November 22, 2016, 11:35:31 AM H,
Trying to locate ESKONF address, so far no luck. Tried 0x10c70, did not work for me. I know that it might be a different address since its a european ECU Im trying to switch off SAI and its relay's, maybe someone will guide me, or point where to start I have attached the stock file Thanks in advance Title: Re: Need some help, trying to locate ESKONF in Audi A6 allroad 2.7T 263HP 4Z7907551N Post by: brodway2800 on November 23, 2016, 10:58:09 AM ??
Title: Re: Need some help, trying to locate ESKONF in Audi A6 allroad 2.7T 263HP 4Z7907551N Post by: gt-innovation on November 23, 2016, 02:32:04 PM H, Trying to locate ESKONF address, so far no luck. Tried 0x10c70, did not work for me. I know that it might be a different address since its a european ECU Im trying to switch off SAI and its relay's, maybe someone will guide me, or point where to start I have attached the stock file Thanks in advance Can you define what you mean by "Tried" i have a complete a2l for the 4Z7907551R (maybe for N too)and it shouldn`t be that hard to much yours... Title: Re: Need some help, trying to locate ESKONF in Audi A6 allroad 2.7T 263HP 4Z7907551N Post by: brodway2800 on November 24, 2016, 12:42:20 PM im trying to remove rear lambda sensors.
Posted picture above, i think thats the eskonf, as i managed to switch of SAI, and lambda sensors but, still dont know how to eliminate lambda heating. As i unplug them ecu shows fault with lambda heating. And when you go to live readings, i can se that it is on Title: Re: Need some help, trying to locate ESKONF in Audi A6 allroad 2.7T 263HP 4Z7907551N Post by: brodway2800 on November 24, 2016, 12:52:15 PM maybe some adjustment needs to be done to CDTHSHE CDTHSHE2 or CLRHK CLRHKA ?
Title: Re: Need some help, trying to locate ESKONF in Audi A6 allroad 2.7T 263HP 4Z7907551N Post by: RBPE on November 25, 2016, 05:11:16 AM ESKONF - Output configuration, other codewords for functioning (at least in ME7.1.1.) can be in another area usually a group of 00/01's after FF area (circled attached pic) - plus you'll find them around the map areas for that function so look for an 01 to change to 00 in those map areas if you have a def file.
|