|
Title: Gallettpo bootmode inactive??? Post by: EuroXs4 on November 27, 2016, 01:30:14 PM Hey guys.I am having some issues gettin a B6 a4 ecu into boot mode with galletto.P/N 8e0 909 518ak.I have the galleto copy that daz posted some time ago installed and the program sees the cable as good.However When try to read ecu info or read.I ground pin 24 for 5 seconds and hit ok.I get the message boot mode inactive.Has anyone run into this with me7.5???I would try reading with nefmoto however nefmoto does not recognize this cable.Any help would be appreciated.I know certain ecus needs a 10k resistor.However i was under the impression this one does not.Any help would be greatly appreciated.
Title: Re: Gallettpo bootmode inactive??? Post by: EuroXs4 on November 27, 2016, 05:43:24 PM Ok So I was able to get into boot mode and read the flash from the ecu.However the 518AK xdf that I have it seems as if none of the values make sense.rev limit of 10k rpms.This is a bone stock ecu.Is it possible galleto got it all wrong and read garbage out??
Title: Re: Gallettpo bootmode inactive??? Post by: tao13 on July 10, 2018, 12:12:43 PM do you this operation with ecuon car or on the bench?
Title: Re: Gallettpo bootmode inactive??? Post by: nyet on July 10, 2018, 03:39:46 PM Why not compare it with a known stock .bin
|